Support

Windows Server 2003 Statement

The following print servers have been tested and found to work properly in Windows Server 2003 (TCP/IP only):
Products Firmware (lowest version)
AXIS 5900 6.33
AXIS 5800+ 6.33
AXIS 5800 6.21
AXIS 5600+ ver.1 6.33
AXIS 5600+ ver. 2 6.34
AXIS 5600 6.16
AXIS 5670e 6.42
AXIS 5570e 6.42
AXIS 5470e 6.33
AXIS 5550 6.42
AXIS 5500 6.42
AXIS 5400+ 6.34
AXIS 5400 6.16.0
AXIS 560 6.16
AXIS 540+ 6.16
AXIS 640 6.16.0
AXIS 660 6.16
AXIS 670e 6.33
AXIS 1440 5.52
AXIS 1610 5.94
AXIS 1611 5.94
AXIS 1620 6.12
AXIS 1650 1.00
AXIS 140 BJC 5.56
AXIS 570 5.42
AXIS 570+ 5.80
AXIS OfficeBasic USB Wireless 6.10.21x
AXIS OfficeBasic USB 6.43
AXIS OfficeBasic Parallel 6.43
The following Axis tools have been tested and found to work properly in Window Server 2003:
Axis Software Tools
AXIS Print Monitor version 3.01 and above
AXIS CAPT Print Monitor version 2.00 and above
AXIS ThinWizard version 3.00 and above
IP Jumpstart version 1.00 and above
Note: AXIS IP JumpStarter uses the default network adapter. On systems with multiple adapters, the access order may need adjustment in the network settings.
 
Other Information:
AXIS NetPilot is a 16-bit application and will therefore not become Windows Server 2003 certified, since only 32-bit applications can be certified to run under Windows Server 2003. However, no problems have been reported with AXIS NetPilot 2.62 running under Windows Server 2003.