XF60-Q1765 Explosion-Protected Network Camera is UL-certified for hazardous areas, valid mainly in the USA market. XF60-Q1765 -50 C UL offers three 3/4" NPT conduit entries. The camera has a 110 V AC power input.

Combining technologies
XF60-Q1765 Explosion-Protected Network Camera is an AXIS Q1765-LE Camera (without the IR LEDs) mounted inside an explosion-protected stainless steel housing. In addition, it includes AXIS Surveillance Card 64 GB, a wiper and support for a washer. The camera provides superb image quality and color fidelity, and offers full HDTV 1080p resolution at 25/30 fps. With 18x optical zoom and autofocus, the camera is ideally suited for remote monitoring situations common in hazardous areas.
The camera features an electropolished 316L stainless steel housing certified for hazardous areas according to UL (the certification applies in the USA market).

Critical infrastructure
XF60-Q1765 is ideally suited for video surveillance monitoring in hazardous areas in critical infrastructure such as onshore, offshore and marine environments in the oil and gas industry. In addition, typical application areas are also dusty environments in other industries, for example, paper and textile industries, and grain handling.

Flexible integration and remote accessibility
XF60-Q1765 provides a high level of flexible integration possibilities with other equipment, such as access control, illumination and audio. It offers remote accessibility, using any existing IP-based networks. XF60-Q1765 for hazardous areas is a complement to Axis’ wide range of network cameras that can be used in safe areas.
Wide Dynamic Range - WDR
For maximum forensic value and usability in scenes with both very bright and very dark areas. Read moreTechnical specifications
Camera
Image sensor | CMOS |
Image sensor size | 1/2.9 |
Sensor size in megapixel | 2.0 |
Lightfinder | - |
Wide dynamic range | Dynamic Contrast |
Min illumination/ light sensitivity (Color) | 0.50 lux |
Min illumination/ light sensitivity (B/W) | 0.04 lux |
Video
Max video resolution | 1920x1080 |
Max frames per second | 25/30 |
Electronic image stabilization | – |
Lens
Focal length | 4.7 - 84.6 mm |
Optical zoom | 18 |
Horizontal field of view | 59 - 4 ° |
Vertical field of view | 35-2 ° |
Compression
Zipstream | – |
H.264 | Baseline, Main |
H.265 | – |
Motion JPEG | Yes |
Network
PoE Class | – |
Security
Signed firmware | – |
Secure boot | – |
TPM | – |
General
Remote focus | – |
Remote zoom | – |
Local storage (memory card slot) | Yes |
Outdoor Ready | Yes |
IP rating | IP66, IP67 |
Power
Power (max) | – |
Power (average) | – |
DC input voltage | – |
AC input voltage | 110-110 V |
Accessories
Mounts
Discontinued products
The following compatible products have been discontinued.Storage
How to buy
Want to buy Axis products?
Find resellers, system integrators and installers of Axis products and systems.
Want to sell Axis products?
Interested in becoming a reseller? Find contact information for distributors of Axis products and systems.
Become a partner
Are you a reseller, distributor, system integrator or installer? We have partners in nearly every country in the world. Find out how to become one!
Part number for ordering
Help me choose
Axis explosion-protected cameras are certified for installation in environments with both gas and dust. Certifications may differ according to country. See all certifications for a product on its datasheet.
ATEX
Mandatory certification for installations within EU, but accepted also in other parts of the world. Products tested against EN60079 and certified for use in hazardous locations according to ATEX Equipment Directive 2014/34/EU.
IECEx
Products tested against IEC60079 and certified for use in hazardous locations. The international IEC60079 standard is widely accepted in Asia-Pacific, Africa and Australia.
UL
Products tested according to the hazardous location standard UL1203, by Labtest Certifications, for installations in North America, where the Class/Div system is used.
CSA
Products tested against CSA60079 and certified for use in hazardous locations in Canada, where the Class/Zone system is used.
CCOE
Products tested against IEC60079 and certified for use in hazardous locations according to Indian regulations.
IA
Products tested against IEC60079 and certified for use in hazardous locations in South Africa.
CNEX
Products tested against IEC60079 and certified for use in hazardous locations in China.
INMETRO
Products tested against IEC60079 and certified for use in hazardous locations in Brazil.
EAC
Products tested against IEC60079 and certified for use in hazardous locations in the Customs Union of Russia, Kazakhstan and Belarus shall bear the EAC (EuroAsian Conformity) mark.
Name | Explosion certification | Part number |
---|---|---|
XF60-Q1765 UL -50C 110 V | Class/Division, Class/Zone | 01124-001 |