D101-A XF P3807 Explosion-Protected Network Camera
- Certified for Class I/II/III, Division 1 and Zone 1
- Seamless 180° panoramic overviews
- 8 MP, 180° multisensor camera
- Cost-efficient installation with PoE
- Forensic WDR and Lightfinder
With four sensors built into a single camera, and seamless stitching of all four images, this lightweight camera delivers 180° panoramic overviews with excellent images and no blind spots. It's ideal for surveillance in production areas where it allows the operator to monitor one, single smooth and cohesive video stream.
Tough in hazardous areas, see the whole picture
D101-A XF P3807 is certified to international standards to ensure safe operation in explosion prone applications. It comes enclosed in an aluminum red housing with IP66 rating. By using red, it helps the camera stands out more, especially useful in darker environments. This camera is perfect when you need to see the whole picture. It offers 180° panoramic coverage with complete 90° vertical coverage so you don't have to worry about blind spots and can be sure of capturing all the details and everything that's happening around you.
This 8-megapixel multisensor camera offers seamless 180° panoramic coverage and captures high quality forensic images up to 30 fps. It acts as a single camera in your video management software (VMS) so you can combine four images into one and apply analytics across the entire image helping save time on installation and requiring only one single license. What's more, it features Forensic WDR and Axis Lightfinder for clear, sharp images even in challenging light.

Flexible installation
This lightweight camera can be powered by PoE with just one Ethernet cable for power and network access. And because the power source is located far from the camera, there's less likelihood of a power failure. This cost-effective camera is essentially a four-camera-in-one-unit so there's only one camera to install and manage in the video management software (VMS) where you can easily install whatever analytics you need and setup events and alarms. Plus, it offers Axis Zipstream technology for lower bandwidth and storage requirements and thanks to Axis open interfaces, it's easy to integrate with existing surveillance system.

Privacy masking
In some situations there are defined areas of the camera view where you have no need or right to monitor, such as a neighboring property. In these situations, static privacy masking is ideal for use indoors and outdoors. D101-A XF P3807 supports not only simple opaque blocks, but also pixelation of the masked area and polygonal shapes for more flexible coverage. The masking permanently blocks a selected area from view, guaranteeing privacy where required.
Technical specifications
Camera
Image sensor | CMOS |
Image sensor size | 1/2.9 |
Lightfinder | Lightfinder |
Wide dynamic range | Forensic WDR |
Min illumination/ light sensitivity (Color) | 0.17 lux |
Min illumination/ light sensitivity (B/W) | 0.05 lux |
Video
Max video resolution | 4320x1920 |
Max frames per second | 25/30 |
Electronic image stabilization | – |
Lens
Focal length | 3.2 mm |
Optical zoom | - |
Horizontal field of view | 180 ° |
Vertical field of view | 90 ° |
Compression
Zipstream | Yes |
H.264 | Baseline, High, Main |
H.265 | – |
Motion JPEG | Yes |
Network
PoE Class | 3 |
Security
Signed firmware | Yes |
Secure boot | – |
TPM | – |
General
Remote focus | – |
Remote zoom | – |
Local storage (memory card slot) | Yes |
Outdoor Ready | Yes |
IP rating | IP66 |
Power
Power (max) | – |
Power (average) | – |
DC input voltage | – |
AC input voltage | – |
Analytics
Accessories
Cables & connectors
Edge storage
Mounts

Pole Mount D201-S XPT
For explosion-protected PTZ network cameras Requires additional accessory Recommended for this product
Wall Mount D101-A XF
For explosion-protected panoramic network cameras Recommended for this product
Wall Mount D201-S XPT
For explosion-protected D101/D201 dome cameras Recommended for this productDiscontinued products
The following compatible products have been discontinued.Mounts
How to buy
Want to buy Axis products?
Find resellers, system integrators and installers of Axis products and systems.
Want to sell Axis products?
Interested in becoming a reseller? Find contact information for distributors of Axis products and systems.
Become a partner
Are you a reseller, distributor, system integrator or installer? We have partners in nearly every country in the world. Find out how to become one!
Part number for ordering
Help me choose
Axis explosion-protected cameras are certified for installation in environments with both gas and dust. Certifications may differ according to country. See all certifications for a product on its datasheet.
ATEX
Mandatory certification for installations within EU, but accepted also in other parts of the world. Products tested against EN60079 and certified for use in hazardous locations according to ATEX Equipment Directive 2014/34/EU.
IECEx
Products tested against IEC60079 and certified for use in hazardous locations. The international IEC60079 standard is widely accepted in Asia-Pacific, Africa and Australia.
UL
Products tested according to the hazardous location standard UL1203, by Labtest Certifications, for installations in North America, where the Class/Div system is used.
CSA
Products tested against CSA60079 and certified for use in hazardous locations in Canada, where the Class/Zone system is used.
CCOE
Products tested against IEC60079 and certified for use in hazardous locations according to Indian regulations.
IA
Products tested against IEC60079 and certified for use in hazardous locations in South Africa.
CNEX
Products tested against IEC60079 and certified for use in hazardous locations in China.
INMETRO
Products tested against IEC60079 and certified for use in hazardous locations in Brazil.
EAC
Products tested against IEC60079 and certified for use in hazardous locations in the Customs Union of Russia, Kazakhstan and Belarus shall bear the EAC (EuroAsian Conformity) mark.
Name | Explosion certification | Part number |
---|---|---|
D101-A XF P3807 | ATEX, Class/Division, Class/Zone, IECEx, INMETRO | 01914-001 |