• Go to www.axis.com and look for your product page and under Support & Documentation the PTZ drivers are located for download.

  • Download the PTZ driver to your computer, see also the technical documentation and Connection examples for easier installation.

  • Connect the serial cabling according to the connection example

  • Go to the encoder PTZ, Driver Selection page and upload your PTZ driver, Pelco is preloaded.

  • Activate the selected PTZ driver by clicking in the Enable PTZ and set the correct camera id that match the settings on your camera.

  • If needed change the serial port settings under System, Ports & Devices, COM port.

 

For further help see the help pages in the encoder.