AXIS Q2901-E PT Mount Temperature Alarm Camera

AXIS Q2901-E PT Mount Temperature Alarm Camera from left
  • AXIS Q2901-E PT Mount Temperature Alarm Camera from left
AXIS Q2901-E PT Mount Temperature Alarm Camera from left
Axis 5-year warranty 5-year warranty
PT mount-ready and remote temperature monitoring
  • 360° endless pan and 135° tilt with AXIS T99A11 Positioning Unit
  • Temperature alarm zones
  • Isothermal palettes
  • Spot temperature reading
Part numbers

Under specific conditions, some Axis thermal cameras are capable of precise temperature measurements, but they are not designed by Axis for the specific intention of human fever detection nor the diagnosis, mitigation or prevention of disease or health conditions. Thus, Axis thermal cameras are, for example, not approved by FDA in the US for this use.

Temperature detection

AXIS Q2901-E PT Mount offers two kinds of alarms triggered by a deviation of the temperature: if the temperature goes above or below a set limit, or if the temperature increases too rapidly. The camera can detect the temperature of an object between-40 °C to 550 °C (-40 °F to 1022 °F). The accuracy is +- 5 ° in temperatures below 150 °C (302 °F). The accuracy is +- 5 ° in temperatures below 150 °C (302 °F). To reach an unobstructed field of view (360°) and a ground-to-sky view of 135°, you can mount the PT mount thermal camera on AXIS T99A11 Positioning Unit. 

Isothermal palettes

 Isothermal imaging makes it possible to configure highlighted temperature-spans in the image. They help to define which temperature corresponds to which color. The Lower limit denotes the temperature where the colored part of the palette will start and all temperatures above this limit will stand out.

Spot temperature reading

This capability is used to view the temperature of a particular area of the image. The emissivity can also be adjusted (depending on the material characteristics) to get a more precise reading. Used as a visual aid for an operator. For a list of emissivity for different material, see here.

Technical specifications

Datasheet (pdf)
Models: AXIS Q2901-E PT Mount 19 mm 8.3 fps / AXIS Q2901-E PT Mount 9 mm 8.3 fps
Camera
Image sensor Uncooled microbolometer
Thermal sensitivity (NETD) <50 mK
Thermal sensor resolution 336x256
Video
Max video resolution 720x576
Max frames per second 8.3
Electronic image stabilization –
Multiple color palettes Yes
Lens
Focal length –
Horizontal field of view –
Vertical field of view –
Compression
Zipstream –
H.264 Baseline, Main
Motion JPEG Yes
Audio
Audio Support –
System Integration
Audio detection –
Active tampering Yes
Alarm inputs/outputs –
Serial connectors Yes
Video motion detection Yes
Network
PoE Class 3
Security
Signed firmware –
General
Local storage (memory card slot) Yes
Operating temperature -40 to 60 °C
Outdoor Ready Yes
IP rating IP66
* Some technical specifications may vary depending on which hardware option you choose.

Analytics

Make your network camera solution more intelligent with powerful analytics and functionality.

Supported

AXIS Loitering Guard icon

AXIS Loitering Guard

For detecting loiterers

AXIS Video Motion Detection 3

Accessories

Make the most out of your solution. Use the filter to find compatible products. Start by selecting your product variant (compatibility may rely on it).
Filter by:
Type:
Show discontinued products

Discontinued products

The following compatible products have been discontinued.

Edge storage

Power

Video decoders

How to buy

Axis solutions and individual products are sold and expertly installed by our trusted partners.

Want to buy Axis products?

Find resellers, system integrators and installers of Axis products and systems.

Find a reseller

Want to sell Axis products?

Interested in becoming a reseller? Find contact information for distributors of Axis products and systems.

Find a distributor

Become a partner

Are you a reseller, distributor, system integrator or installer? We have partners in nearly every country in the world. Find out how to become one!

Become a partner

Part number for ordering

Name Axis region Part number
AXIS Q2901-E PT Mount 9 mm 8.3 fps AR, AU, BR, EU, JP, KR, UK, US 0646-001
AXIS Q2901-E PT Mount 9 mm 8.3 fps CN 0646-009
AXIS Q2901-E PT Mount 19 mm 8.3 fps AR, AU, BR, EU, JP, KR, UK, US 0648-001
AXIS Q2901-E PT Mount 19 mm 8.3 fps CN 0648-009

Support and resources

Need Axis product information, software, or help from one of our experts?
Documentation and software

Documentation and software

Get product-specific information, firmware and software. Go to documentation and software
Technical support

Technical support

Contact our support staff for efficient, one-on-one assistance with your Axis products. Get in touch
Axis 5-year warranty

Axis 5-year warranty

Get information and details on your 5-year product warranty. Go to warranty
To top