FAQ database
25 search results
-
What happens when you exceed the PoE power budget with new devices?New PoE devices can still be connected, but they will not be given power from the PSE controller. It would be best to disable PoE
-
What happens when adding a new PoE devices when the total power budget is almost consumed?Once the remaining power budget is below 32 watts and a new device that is identified as a Class 4 devices is connected, the switch
-
What is the maximum PoE output per Port?The maximum output is 30W
-
Does the S20 Support PoE Plus?Yes, all modesl support 802.AF and 802.AT specifications for PoE distribution
-
Does the AXIS S20 Switch support spanning trees The AXIS S20 Switch does not currently support spanning trees or loop protection
-
What layer is the AXIS S20 SwitchThe Axis S20 Switch is a layer 2 switch.
-
What is the default username and password for the AXIS S20 Switch web interfaceThe default login credentials are; Username: admin password: system * Please note it is highly recommended to change the default password to further increase security
-
What are the speeds of the network interfaces on the AXIS S20 Switch.The PoE ports are 100Mbps Full Duplex The Uplink ports are 10/100/1000 Mbps Full Duplex
-
Is there any network redundancy available on the AXIS S20 Switch There is no available network redundancy on the switch. The combo ports (U1 Uplink & SFP1) which are available on the switch are not designed
-
What is the default IP address of the S20The S20 is split into two physical sections the Switch part and the computer part so both parts require to have two seprate default IP