Documentation for AXIS Companion version 4
- AXIS Companion - Migrating from version 3 to version 4 NL106 KB
- AXIS Companion - Migrating from version 3 to version 4100 KBEngels
- AXIS Companion - Remote System Management129 KBEngels
- AXIS T8705 Video Decoder with AXIS Companion - Integration gudie76 KBEngels
- Axis Secure Remote Access645 KBEngels
OS: Windows 8 64-bit
CPU: Intel Core i5 (ARM CPU not supported)
RAM: 4 GB
Graphics card: 256 MB onboard video memory
Note! Always use the latest graphics card driver
Network: 100 Mbps
Uninterruptible Power Supply (UPS)
AXIS Companion video management software supports all Axis network cameras and Axis video encoders, with firmware version 8.40 or higher. For information about compatibility of Axis devices in AXIS Companion, please refer to supported products.
Network video recorder
For longer retention time needed and when the system comprises of a larger number of video channels, the AXIS S3008 Recorder is the recommended solution. It supports up to 8 Axis cameras and also provides PoE to the cameras.
Uninterruptible Power Source (UPS)
In locations with unreliable power, a UPS can be a good investment to ensure maximum uptime. This is particularly beneficial for an AXIS Companion system that uses Power over Ethernet to power its cameras over the network, since a single UPS can then be used to secure not only the network equipment but also all the cameras in the system – a clear advantage over analog DVR-based systems.
A router is typically used whenever wireless cameras are used, wireless local access is required or when remote access is enabled. Routers with Wi-Fi Protected Setup (WPS) simplifies installation of Axis’ wireless cameras. Routers with UPnP simplify the setup of remote access to a system.
Axis does not make any commitments or promises regarding quality, performance or other features with respect to the presented third party products. Axis cannot be held responsible for the correctness or completeness of the information included here. The information is provided "as is" without warranty of any kind.
AXIS Companion version 4 (Windows 64 bit only).
AXIS Companion together with AXIS S3008 Recorder supports Axis cameras and encoders with firmware 5.50 or higher. (Solutions not including AXIS S3008 Recorder, is compatible with firmware 8,40 and later).
Important! If you are using AXIS Companion version 3, please read the section below.
AXIS Companion version 3
There are circumstances where you need an earlier release of AXIS Companion:
- If you have devices with a firmware older than 8.40
- If your site has no internet access
- If you use a third-party NAS
The migration guide contains information that will help you decide what version you need.
AXIS Companion help center
Useful information about how to build solutions using AXIS Companion