FIRMWARE RELEASE NOTES ====================== Products affected: AXIS 223M Network Camera Release date: 2010-06-03 Release type: Production Firmware version: 4.47.1 File name: axis223m.bin Preceding release: 4.47 ---------------------------------------------------------------------------- UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management 2.0, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. RELEASE 4.47.1 ============ Corrections in 4.47.1 since 4.47 ============================== 4.47.1:C01 In a rare case, unit might get inaccessible through HTTP after upgrade and change of HTTP authentication policy. 4.47.1:C02 Error 503 when using 320x240 resolution, 180 degrees rotation does not appear anymore. 4.47.1:C03 More sensitive motion detection is introduced. 4.47.1:C04 Corrected a problem with sockets in motion detection. 4.47.1:C05 A time handler issue has been corrected. Known limitations in 4.47 ========================= 4.47.1:L01 When the IR cut filter is turned on or off events are triggered and the motion detection activity monitor shows movement. 4.47.1:L02 When switching between resolution modes privacy mask position changes. 4.47.1:L03 If the privacy mask goes beyond the right margin and the image gets rotated, the mask might disappear. 4.47.1:L04 Certain combinations of coordinates of privacy masks in widescreen mode makes the masks disappear. 4.47.1:L05 Having mirror image enabled and switching between large wide and normal resolutions causes the video to disappear, a restart is necessary to get video running again. 4.47.1:L06 Overlay Image gets part of its image cropped at larger horizontal positions and max resolution. 4.47.1:L07 The maximum available resolution for MPEG-4 is 640x480 or 640x360 depending on the selected resolution mode. Application Developer Information ================================= Supported AXIS VAPIX API Image Resolutions in Normal Mode: Resolution Exceptions ========== ========== 1600x1200 1280x960 1024x768 800x600 768x576 1) 704x576 1) 2) 704x480 2) 704x288 2) 704x240 2) 640x480 480x360 384x288 352x288 2) 3) 352x240 2) 3) 320x240 240x180 4) 192x144 176x144 2) 3) 176x120 2) 3) 160x120 Supported AXIS VAPIX API Image Resolutions in Widescreen Mode: Resolution Exceptions ========== ========== 1600x900 4) 1280x720 1024x576 800x450 4) 640x360 480x270 4) 320x180 4) 240x135 4) 160x90 4) 1) Not available as bitmap (bmp) image 2) Not equally scaled 3) No support for 90/270 degrees rotation 4) Width is reduced to the closest value divisable by 8 when rotated 90/270 degrees The AXIS VAPIX API, RTSP - Interface Specification found at www.axis.com is supported by the AXIS 223M. The following AXIS VAPIX API groups are supported by the AXIS 223M. For more information please refer to the AXIS VAPIX API specification version 2, available at www.axis.com. Group Exceptions ===== ========== General Image and Video Video status Motion Detection I/O Serial port IP filter Audio Built in templates for dynamic parameters are: Template Group ======== ===== 'event' Event 'external_video' ExternalVideo 'ftpaction' Event.E#.Actions 'ftp_config' EventServers.FTP 'httpaction' Event.E#.Actions 'http_config' EventServers.HTTP 'hwaction' Event.E#.Actions 'motion' Motion 'smtpaction' Event.E#.Actions 'source' Sequence.S0.Source 'tcpaction' Event.E#.Actions 'tcp_config' EventServers.TCP