SOFTWARE RELEASE NOTES ====================== Application: AXIS Perimeter Defender Release date: 2021-09-16 Release type: Production Software version: 3.0.1 File name: AXIS_Perimeter_Defender.exe Preceding Release: 2.7.4 ------------------------------------------------------------------------------- Contact Information =================== Please contact Axis Communications for product information, updates and support at https://www.axis.com/products/axis-perimeter-defender. ------------------------------------------------------------------------------- Installation instructions ========================= Use AXIS Perimeter Defender application to install the ACAP and license key, calibrate perspective and define scenarios on the camera and pair cameras for AXIS Perimeter Defender PTZ Autotracking. For more instructions see the User Manual. Compatible products =================== See complete list of compatible products at https://www.axis.com/products/axis-perimeter-defender. New Features in AXIS Perimeter Defender 3.0.1 since 2.7.4 ================================= * For Q195x-E thermal cameras, added a new AI mode, which does not require a calibration of the scene for classifications of humans and vehicles. * For Q195x-E thermal cameras, added the possibility to activate an AI filter in a combination with a calibration. * IPv6 Compliance * Updated the demo clip libraires with AI mode demo video. Changes in AXIS Perimeter Defender 3.0.1 since 2.7.4 ============================ C01: Fixed an issue for failed with error Address family for hostname not supported message on the alarm (Using IPV6 Camera) Changes in AXIS Perimeter Defender 2.7.4 since 2.7.2 ============================ C01: Fixed an issue where AXIS Perimeter Defender would have stopped working with FW 10.5. C02: Fixed an issue with AXIS Perimeter Defender when it is set on 2D mode, regarding burnt-in metadata. C03: Fixed an issue with how AXIS Perimeter Defender it requests a stream to the camera, this fix will also apply to those customers that uses AXIS Perimeter Defender on an AHVS environment. C04: Fix an issue with VAPIX events which failed to trigger on LTS FW 9.80.x or 8.40.x. C05: Fix issue which could cause a false alarm on a single frame C06: Added [Yes to all] and [No to all] choices when installing APD/PTZ on multiple devices with same/more recent version already installed Changes in AXIS Perimeter Defender PTZ Autotracking 1.0.11 since 1.0.9 ============================ Changes in AXIS Perimeter Defender PTZ Autotracking 1.0.9 since 1.0.7 ============================ F01: Improved the paring between the fixed camera and PTZ cameras when the PTZ camera is fixed with higher than 16x zoom on the scene. Considerations in AXIS Perimeter Defender ============== CO1: It is not recommended to run other CPU demanding ACAP's at the same time on the camera. CO2: AXIS Perimeter Defender supports the following OS, Windows 10 (64-bit), Windows Server 2012 R2 (64-bit) and Windows Server 2016 (64-bit). C03: AXIS Perimeter Defender requires an Intel Core 2 Duo or later, 2GB RAM and a dedicated graphics card with minimum 1024x768 screen resolution. C04: AXIS Perimeter Defender 2.7.2 only supports cameras with FW 10.4.x or earlier version. C05: AXIS Perimeter Defender 3.0.1 requires a camera with a minimum firmware 7.2x.x or newer. Known Bugs/limitations in AXIS Perimeter Defender ====================== KL01: Long-range mode is only available for older thermal devices KL02: Scene with moving trees can create a faulty calibration KL03: Error messages stay visible even if the camera is deleted or another camera selected KL04: Setup Interface is sometimes degraded when used using Remote Desktop KL05: Looping video in detection results (during calibration validation) may freeze interface for a few seconds depending on computer performance and recording length KL06: If one camera is selected, selecting the license folder will not install the camera license KL07: Interface may crash when too many devices are connected KL08: Same camera can be added with IP and hostname KL09: Camera live view becomes blank in edge-browser panel KL10: Installing a licence does not work if the folder has characters not supported by the OS KL11 Burnt-in Metadata Overlay, and Dynamic Overlay form the camera will not coexist, please use the legacy Text Overlay as explained blow on "KL 12". KL12: Cameras with firmware version 7.20 or connected through AVHS can show double overlay if burnt-in metadata overlay is enabled on streams having the same resolution as the ones used by the Setup Interface. KL13: If enabling “burnt-in metadata overlay” and “text overlay” on firmware 8.20 with APD 2.3.2, does not work, please follow the instructions below. 1) On the cameras GUI access System>Plain Config>Image>Image I0 Text and set 'String' (if not set already) and 'Text enabled' to the parameters below. Do not forget to save the settings. String: %X Text enabled: "just tick the box" (It is also possible, to enable the legacy text overlay using the following VAPIX command: https://protect-eu.mimecast.com/s/dlIlCN8E8hMEnVslClnh?domain=camera-ip-address). 2) Restart the ACAP on the camera, either through the camera GUI, or through the APD application. 3) Optionally, you can also remove the new dynamic text overlay if set or converted during the upgrade to firmware 8.20.