NEW SOFTWARE RELEASE ==================== Application: AXIS Digital Autotracking Release date: November 01, 2012 Release type: Production Software version: 1.0 File name: AXIS_Digital_Autotracking.eap Preceding Release: This is the first release -------------------------------------------------------------------------------- Contact Information =================== Please contact Axis Communications for product information, updates and support at http://www.axis.com -------------------------------------------------------------------------------- Upload instructions =================== In the supported product's web interface, go to the Applications menu and upload this application package or use latest ACM version. Start and configure the application. For more instructions see the User's Guide. Release 1.0 ============ Compatible products =================== * Axis network cameras and video encoders with support for AXIS Camera Application Platform (ACAP). * Product firmware must be 5.50 or later. * See complete list of compatible products at www.axis.com Considerations ============== CO1: It is not recommended to run AXIS Digital Autotracking at the same time as the camera’s built-in motion detection or another Application Packages installed in the camera. This may impact behavior and performance of this application. CO2: The application will not be compatible with any PTZ products C03: Make sure that the product firmware is 5.50 or later. C04: If changing the view area used by Axis Digital Autotracking, the view area width should not be bigger than half of the width of the maximum resolution. Application developer information ================================= See VAPIX AXIS Digital Autotracking API at www.axis.com for more information