FIRMWARE RELEASE NOTE ===================== Products affected: AXIS C1410 Release date: 2021-01-22 Release type: Production Firmware version: 10.0.2.4 Preceding release: 10.0.2.2 -------------------------------------------------------------------------------- Upgrade instructions ==================== NOTE 1: Firmware image version has been updated in previous FW version, meaning that upgrade to this release can only be done from FW version 1.97.1 or newer. If your device is currently running a FW version prior to 1.97.1 you need to upgrade to 1.97.1 or 9.80.2.2, and then apply the latest firmware. Upgrade the firmware according to the instructions given at https://www.axis.com/support/technical-notes/how-to-upgrade or howtoupgrade.txt, which is included in the firmware folder. New features in 10.0.2.4 =========================================================================== 10.0.2.4:F1 Add multiple devices to a site or a zone It is now possible to add up to 40 devices at the same time to a site. The user can also automatically create the root user and set a password for factory default devices as part of adding them to the site. 10.0.2.4:F2 Button-activated paging through line-in With an external physical button connected to the device input connector, the user can temporarily activate and deactivate Line-in and by this interrupt lower priority sources in order to perform paging with a microphone connected to Line-in. (Lower priority sources are advertisements, announcements or background music) 10.0.2.4:F3 On the dashboard of AXIS Audio Manager Edge the user will be notified when a paging source is active. This includes SIP, button-activated paging though Line-in, Vapix media clip and Vapix audio. 10.0.2.4:F4 Polish and Portuguese (Brazilian) added to list of supported languages in AXIS Audio Manager Edge [English, French, Italian, Spanish, German, Dutch] Corrections in 10.0.2.4 since 10.0.2.2 =========================================================================== 10.0.2.4:C01 General stability fixes Known Bugs/Limitations =========================================================================== 10.0.2.4:L1 If the user tries to add more than 40 devices at the same time the system might fail to add all devices. The user can still try again and add the remaining devices in one or more sessions. 10.0.2.4:L2 The system will NOT automatically convert the configuration of audio content or schedules from an existing AXIS Audio Player to the new AXIS Audio Manager Edge. This must be done manually. The AXIS Audio Player is still available in this release and it can be used as normal until the user is ready to perform a manual migration of content and schedules. 10.0.2.4:L3 After the introduction of AXIS Audio Manager Edge, the "System Overview" and "System Settings" options in the device configuration menu may be hidden. If you wish to enable these menu options, please start the AXIS Audio Player ACAP (found under the menu option "Services"). Then open the AXIS Audio Player and use the application (e.g. open the volume slider in the lower right corner and adjust the volume) Go back to the device configuration menu and refresh the browser page. The "System Overview" and the "System Settings" options should now be available. Please note that if you wish to stay with the previous audio system or wish to continue using the Audio relay service API we strongly advise you to use the long term support (LTS) software track. (FW version 9.80.2.2) 10.0.2.4:L4 Currently no support for running AAM Edge in Safari or in Internet Explorer. 10.0.2.4:L5 It is currently not possible to create schedules across midnight. Schedules can be created from 00:00 to 23:59, but it is not possible to create a schedule from e.g. 21:00 to 03:00 the following day. This use case will have to be schedule with two entries. One entry from 21:00 to 23:59 and a second entry from 00:00 to 03:00 the following day. 10.0.2.4:L6 Uninstalled ACAPs will still show up in the list of available ACAPs when creating an ACAP music source. 10.0.2.4:L7 User cannot supply passphrase for encrypted SD cards in the device configuration application after factory default has been performed. 10.0.2.4:L8 To use the 10.0.2.4 Firmware together with Axis Audio Manager Pro you must update Axis Audio Manager Pro to version 3.3.1.3.33 or higher.