FIRMWARE RELEASE NOTE ===================== Products affected: AXIS C1004-E Release date: 2017-06-30 Release type: Production Firmware version: 1.30.0.2 File name: C1004-E_1_30_0_2.bin Preceding release: 1.30.0 -------------------------------------------------------------------------------- Upgrade instructions ==================== Upgrade the firmware with AXIS Camera Management, HTTP, or FTP. Follow the instructions given in the User Manual, at http://www.axis.com/support/tecnical-notes/how-to-upgrade, or howtoupgrade.txt, which is included in the firmware folder. Corrections in 1.30.0.2 since 1.30.0 ==================================== 1.30.0.2:C1 Apache web server has been updated to version 2.4.25. 1.30.0.2:C2 Fixed critical vulnerability ACV-116267. Known Bugs/Limitations ====================== 1.30.0.2:L1 Recording audio clips does not take in to account that the flash memory can fill up and thus lacks proper error handling. 1.30.0.2:L2 An alert is shown in the web-page when trying to start ACAP after the rule engine is restarted: "Could not start application, file verification failed. Check logs for more information." Restart the camera to solve the issue. 1.30.0.2:L3 Using identical start and stop time for a scheduled event will never trigger an event. 1.30.0.2:L4 Audio clips shipped with the product has been updated in C1004-E/C2005 R1.25.1, so it is will be necessary to factory default the speaker to get the new clips. 1.30.0.2:L5 When changing an active https-certificate, the product needs to be restarted for the new certificate to be applied. 1.30.0.2:L6 Password longer than 64 characters is truncated without notifying the user about it. 1.30.0.2:L7 Generic "File to large"-message when uploading audio clip to device with no more space. 1.30.0.2:L8 Sip application skips sending 180 message. Device auto - answers 1.30.0.2:L9 It is not possible to send both RFC2388 and RFC2976 DTMFs through Asterisk at the same time. This limitation can be avoided by using one of RFC 2388 or RFC 2976. It can also be avoided by using Asterisk to transcode into RFC 2976. 1.30.0.2:L10 When adding a Action Rule to trigger Speaker test on DTMF the rule is not shown in VoIP overview page. 1.30.0.2:L11 Not possible to trigger on failed Auto Speaker Test with current Action Engine. 1.30.0.2:L12 If you are running Axis Audio Player version 0_9 or 0_10 and have play-lists configured you have to upgrade to version 0_11 before upgrading the firmware to version 1.25.2.1 otherwise you are going to loose your play-lists.