FIRMWARE RELEASE NOTE ===================== Products affected: AXIS A8105-E Release date: 2017-06-15 Release type: Production Firmware version: 1.65.1 File name: A8105_1_65_1.bin Preceding release: 1.58.2.1 -------------------------------------------------------------------------------- Upgrade instructions ==================== Upgrade the firmware with AXIS Camera Management, HTTP, or FTP. Follow the instructions given in the User Manual, at http://www.axis.com/support/tecnical-notes/how-to-upgrade, or howtoupgrade.txt, which is included in the firmware folder. New features in 1.65.1 since 1.58.2.1 =================================== 1.65.1:F1 SIP Registration Interval can now be modified to a value between 1 second and 36000 seconds. Default value is 300 seconds. 1.65.1:F2 It is now possible to repeat audio clips in the event setup. 1.65.1:F3 SIP Accounts can now be enabled and disabled. 1.65.1:F4 Configuring a secondary SIP server (Registrar and PublicDomain) is now supported. If the primary SIP server is down the device will fallback to the secondary server. 1.65.1:F5 The maximum duration for SIP calls can now be configured. 1.65.1:F6 Audioclips in mp3 format with a sample rate of 16kHz are now supported. 1.65.1:F7 Relays and outputs are now supported as trigger actions in the Events setup. Corrections in 1.65.1 since 1.58.2.1 ================================== 1.65.1:C1 Fixed critical vulnerability ACV-116267. 1.65.1:C2 Fixed Axis Door Controller Recipient to retrieve doors in an Action Rule 1.65.1:C3 Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3. 1.65.1:C4 Fixed Security vulnerability CVE-2016-5195. 1.65.1:C5 Fixed security vulnerability CVE-2015-7547 Known Bugs/Limitations ====================== 1.65.1:L1 When using mp3 files with other samplerates than the native 16kHz performance might suffer and delays be introduced. 1.65.1:L2 As action rules holds copies of recipient information independentally of the Recipient configuration, it is possible to call a SIP recipient using an action rule despite the recipient is removed in the Recipent configuration. To prevent this, one must remove the recipient from the action rule too. 1.65.1:L3 It is not possible to send both RFC2388 and RFC2976 DTMFs through Asterisk at the same time. This limitation can be avoided by using one of RFC 2388 or RFC 2976. It can also be avoided by using Asterisk to transcode into RFC 2976. 1.65.1:L4 Denied access does not show in access log (System Options>Support>Logs and Reports>Access Log) 1.65.1:L5 When the device is facing up or down, tilt tampering detection fuctionality does not work optimally and may generate to events oftern even though the device is not moved or tilted. (The gravity does not effect the two axis normally used for the tilt detection making it sensitive to noise) 1.65.1:L6 TerminateCall feature does not work well with AMC. When AMC is used, the connection lost retry functionality will reconnect the AMC client within seconds of the call being terminated. This results in a new incoming VMS call being setup. Hence, it is not possible to use TerminateCall for VMS Calls in AMC. Supported AXIS VAPIX API Image Resolutions for AXIS A8105-E =========================================================== Resolution Exceptions ========== ========== 1920x1200 1920x1080 1600x1200 1400x1050 960x1280 1280x960 1280x800 720x1280 1280x720 1024x768 1024x640 600x800 800x600 854x480 800x500 450x800 800x450 480x640 640x480 640x400 360x640 640x360 480x360 480x300 480x270 320x240 320x200 180x320 320x180 240x180 160x120 160x100 160x90 768x576 1) 720x576 1) 704x576 1) 704x480 1) 704x288 1) 704x240 1) 384x288 1) 352x288 1) 352x240 1) 240x135 1) 192x144 1) 176x144 1) 176x120 1) 80x50 1) 1) Not visible in web user interface 2) Available for Overview view 3) Available for Panorama view 4) Available for Double Panorama view 5) Available for Quad view 6) Available for View area