FIRMWARE RELEASE NOTES ====================== Products affected: AXIS A8105-E Release date: 2016-06-10 Release type: Production Firmware version: 1.58.2.1 File name: A8105-E_1_58_2_1.bin Preceding release: None AMC version: 7.1.2.2-1 Onvif support: Profile S ------------------------------------------------------------------------------ UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. New Features (compared to AXIS A8004-VE 5.85.1) ============ 1.58.2.1:F1 Multiple simultaneous SIP calls are now supported: Up to 6 initiated calls, up to 1 active incoming calls and up to 2 active calls in total. 1.58.2.1:F2 VoIP configuration and status is now included in the Server report. 1.58.2.1:F3 The default value of Network.HTTP.AuthenticationPolicy parameter is changed to digest (Encrypted). For outgoing HTTP requests for HTTP notifications and Axis Door Controller interaction (proxy.cgi) the AuthenticationPolicy parameter is used increasing the protection against Man-in-the-middle attacks. 1.58.2.1:F4 It is now possible to configure what audio codecs to use in SIP calls. 1.58.2.1:F5 It is now possible to change VMS settings using the web interface. VMS settings control the Call/State event emulation when accessing the VAPIX streaming API:s from e.g. a VMS. The VMS call timeout is now configurable, in previous versions it was fixed to 30 seconds. 1.58.2.1:F6 It is now possible to configure stream parameters for SIP calls. Resolution and framerate is configurable. 1.58.2.1:F7 Automatic rotation of the image depending on the orientation of the product is now supported in SIP calls. The same parameters used in the VAPIX API is used to control the rotation for SIP calls. 1.58.2.1:F8 Media in SIP calls can now be sent encrypted using SRTP. Encryption modes: None - No encryption BestEffort - Use encryption when available Mandatory - Do not set up calls if remote does not support encryption TLS should be used as transport mode when encrypting media as shared secret is sent in SDP. Supported cryptos: AES_CM_128_HMAC_SHA1_80 AES_CM_128_HMAC_SHA1_32 Corrections in 1.58.2.1 since A8004-VE 5.85.1.1 ============================================== 1.58.2.1:C1 When making a video-only SIP call, the call tries to connect but no video is sent and the call is terminated. 1.58.2.1:C2 Previously, A8004-VE supported only boolean property events as additional conditions and thereby, Call/State events could not be used as an additional condition. This has now been corrected. 1.58.2.1:C3 In some setups, calls via TCP or TLS does not respond to hangups from the remote peer after ca 30 seconds. A connected call can be hung up by pressing the call button, sending a axcall:TerminateCall request or restarting the device. 1.58.2.1:C4 Initial H264 key frame loss on some devices when making SIP calls is now fixed. 1.58.2.1:C5 SDP parameters for H.264 now includes correct profile-level-id. Previously some clients was unable to render the video correctly. 1.58.2.1:C6 Fixed a critical security vulnerability. Known Bugs/Limitations ====================== 1.58.2.1:L1 As action rules holds copies of recipient information independentally of the Recipient configuration, it is possible to call a SIP recipient using an action rule despite the recipient is removed in the Recipent configuration. To prevent this, one must remove the recipient from the action rule too. 1.58.2.1:L2 For the Java Applet viewing to work with Java 7 update 51 and later add the camera URL to the exception list as per: http://www.java.com/en/download/help/java_blocked.xml 1.58.2.1:L3 When a Swedish language file is uploaded, the swedish flag is missing in the UI. 1.58.2.1:L4 It is not possible to send both RFC2388 and RFC2976 DTMFs through Asterisk at the same time. This limitation can be avoided by using one of RFC 2388 or RFC 2976. It can also be avoided by using Asterisk to transcode into RFC 2976. 1.58.2.1:L5 Denied access does not show in access log (System Options>Support>Logs and Reports>Access Log) 1.58.2.1:L6 When the device is facing up or down, tilt tampering detection fuctionality does not work optimally. 1.58.2.1:L7 When recording to Genetec Security Desk, no sound will be recorded.