FIRMWARE RELEASE NOTES
                        ======================

Products affected: AXIS A1001

Release date:      2017-10-23

Release type:      Production

Firmware version:  1.60.0.1

File name:         A1001_1.60.0.1.bin

Preceding release: 1.60.0

Onvif support:     Profile C, Profile A

------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

Upgrade the firmware with AXIS Camera Management, HTTP, or FTP.
Follow the instructions given in the User Manual, at
http://www.axis.com/support/tecnical-notes/how-to-upgrade,
or howtoupgrade.txt, which is included in the firmware folder.

If in an A1001 controller cluster make sure to upgrade all controllers. 
Either all at a time using ACM or straight after each other using web interface 
or FTP. The entire cluster always needs to be on the same Firmware!

If you encounter any issues when upgradig firmware - Contact  Axis tech support. 
Never Downgrade/roll back your firmware without a full factory default of your 
product!

Corrections in 1.60.0 since 1.60.0.1
=================================

1.60.0.1:C01
Fixed critical security vulnerabilities

Known Bugs/Limitations
======================

1.60.0.1:L02
It is not possible to create action rules with schedules, other than “Always (No Schedule)” 
as well as with additional conditions, when in a controller cluster.

1.60.0.1:L12
During start up of the device the web server is reachable earier than in
previous FW, before other sub-systems are operational, possibly resulting in AEM
showing 'Failed to retrieve device info' on its overview page if accessed during
this time. Reloading the page a few seconds later will resolve this issue.

1.60.0.1:L14
If you have offline controllers in a controller cluster and try to remove one of
the units that is online this requires a majority of all controllers being
online excluding the controller being removed.

1.60.0.1:L16
To change the recipient of an Action Rule, please click the "Modify..." button
and change there. The drop-down in the Action Rule lists currently does not
work.

1.60.0.1:L19
If you have a door configured with a door monitor, the lock button in AEM will
not immediately lock the door. It will only set the controller in a locking
state. The door lock will be locked once the door monitor indicates that the
door is closed.