FIRMWARE RELEASE NOTES ====================== Products affected: AXIS V5914 Release date: 2015-04-23 Release type: Production Firmware version: 5.75.1 File name: V5914_5_75_1.bin Preceding release: First release AMC version: 7.1.2.2-1 Onvif support: Profile S ------------------------------------------------------------------------------ UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. Known Bugs/Limitations ====================== 5.75.1:L01 When the automatic IR cut filter enables/disables the IR cut filter, it may trigger motion detection. 5.75.1:L02 Recording streams to SD Card with a total bit rate above 12Mbit/sec may cause missing frames/sequences. 5.75.1:L03 To avoid corrupt recordings, it is recommended to unmount the SD Card before ejecting it. 5.75.1:L04 When changing an active https-certificate, the product needs to be restarted for the new certificate to be applied. 5.75.1:L05 The framerate may be lower than expected when streaming MJPEG over https 5.75.1:L06 Time modifiers used in the field "Create folder" is only used upon activation of the rule, hence no new folders are created with the current time during an active rule. To have new folders created with time modifiers you should add them in the "Base filename". 5.75.1:L07 To be able to seek in exported mkv recordings you need to use AXIS Matroska File Splitter, see axis.com. Files are playable both with and without AXIS Matroska File Splitter. 5.75.1:L08 If setting the video stream resolution to an unsupported value, it's not possible to start streaming without specifying a valid resolution or correcting the video stream resolution to a supported resolution. 5.75.1:L09 SNMP OID that have been set are not kept after reboot. 5.75.1:L10 The pixel counter scales with the video in when streaming H.264 video via AMC which may make it hard to use. 5.75.1:L11 Pan limits set using VAPIX are not reflected using ONVIF. 5.75.1:L12 Notice: some receivers does not support receiving empty messages, these will trigger an exception and block further notifications. 5.75.1:L13 The live stream is not updated when using tilt arrows in some revisions of Internet Explorer 9. The stream will update again once the mouse pointer is not hovering over the arrow icon. 5.75.1:L14 Video stream is not available when using IPv6 with Internet Explorer 11 and AMC. 5.75.1:L15 Using special characters § ½ ! £ \ ” @ [ ] ’ $ ¤ {}& * ? ^¨~+ =´ ` < > | , ; : in the upload folder name will not work as expected. 5.75.1:L16 After uploading a new application, the installed applications list web page needs to be manually reloaded for it to be updated. 5.75.1:L17 It's not possible to set the RTPS timeout in the URL specifying the stream. The default value of 120 seconds will always be used. Supported AXIS VAPIX API Image Resolutions for AXIS V5914 ======================================================================================== Resolution Exceptions ========== ========== 1280x720 800x450 480x270 320x180 1024x768 1) 1024x576 1) 800x600 1) 768x576 1) 720x576 1) 704x576 1) 704x480 1) 704x288 1) 704x240 1) 640x480 1) 640x360 1) 480x360 1) 384x288 1) 352x288 1) 352x240 1) 320x240 1) 240x180 1) 192x144 1) 176x144 1) 176x120 1) 160x120 1) 160x90 1) 1) Not visible in web user interface