FIRMWARE RELEASE NOTES ====================== Products affected: AXIS Q6032-E PTZ Dome Network Camera Release date: 2009-06-11 Release type: Production Firmware version: 5.06 File name: Q6032-E_5_06.bin Preceding release: n/a AMC version: 5.4.17.13-1 ------------------------------------------------------------------------------ UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management 2.0, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. RELEASE 5.06 ============ 5.06 is the first official release for the AXIS Q6032-E. Known limitations ================= 5.06:L01 In PAL version a black vertical line, several pixels wide, is visible at the right edge of the image. It is not possible to remove with the X offset parameter. 5.06:L02 Maximum brightness will not result in a white image. 5.06:L03 Auto tracking might be confused when the IR filter is turn on/off 5.06:L04 No more that 4 privacy masks can be placed so close together that they are in the same view at any given time. 5.06:L05 Pan/tilt coordinate directions presented in the text overlay (#x #y) will not be rotated along with the image when rotation is 180. 5.06:L06 The image is always showed with zero rotation at the Motion Detection. 5.06:L07 Stream profile names are limited to alphanumerical characters. 5.06:L08 If IPv6 is enabled while IPv4 is disabled, the DHCP options received from IPv4 are not removed. Also there is no IPv6 address in the mail body of an SMTP test mail. 5.06:L09 The NTP implementation will not synchronize to NTP servers that signal an alarm condition (clock not synchronized) in its Leap Indicator. 5.06:L10 After changing the date/time of the camera, the video stream will stop after 60 seconds with an RTSP session time out. It does not matter if the media stream is started before or after the time is changed. Workaround: Reboot the camera after the time has been changed manually or by NTP. 5.06:L11 It is not supported to configure always multicast RTP. 5.06:L12 When an event or event server is added, modified or deleted all running events will be stopped and restarted. 5.06:L13 There is no boundary check when entering a motion detection window name. If the name is more than 1024 charachters long, the parhand application may restart. 5.06:L14 If RTSP authentication is switched off, streaming H.264 with QuickTime and other Apple compatible clients will not work as they require authentication of the RTSP, but do not allow HTTP authentication. 5.06:L15 The AXIS Media Control client may stop displaying the H.264 video stream after the PC has been locked. Workaround: Reload the Live View page. 5.06:L16 Daylight saving time does not work for Iran. 5.06:L17 Bitmap images have more contrast than the corresponding JPEG images. 5.06:L18 Not possible to perform JPEG/BMP requests with aspect ratio resolutions. APPLICATION DEVELOPER Information ================================= The AXIS VAPIX Application Programming Interface is supported by the AXIS Q6032-E. The following groups are supported by the AXIS Q6032-E. For more information, please refer to the AXIS VAPIX HTTP API specification version 3, part of the AXIS VAPIX API, available at www.axis.com. Group Exceptions ===== ========== General Image and Video PTZ PTZ driver update (ptzupdate.cgi), PTZ administration (ptzadmin.cgi), set PTZ parameters (ptzparam.cgi) Motion Detection IP filter Auto Tracking Built in templates for dynamic parameters are: Template Group ======== ===== 'exclude_area' AutoTracking.A0.ExcludeArea 'event' Event 'autotrackingaction' Event.E#.Actions 'ftpaction' Event.E#.Actions 'guardtouraction' Event.E#.Actions 'httpaction' Event.E#.Actions 'hwaction' Event.E#.Actions 'ptzaction' Event.E#.Actions 'ptzsensoraction' Event.E#.Actions 'recordaction' Event.E#.Actions 'smtpaction' Event.E#.Actions 'tcpaction' Event.E#.Actions 'ftp_config' EventServers.FTP 'http_config' EventServers.HTTP 'tcp_config' Eventservers.TCP 'guardtour' GuardTour 'tour' GuardTour.G#.Tour 'button' PTZ.Auxiliary.A1.Button 'ptzlocator' PTZ.Locator.L#.Zone 'position' PTZ.Preset.P0.Position 'user_ctlqueue' PTZ.UserCtlQueue 'streamprofile' StreamProfile Supported AXIS VAPIX API Image Resolutions Resolution Exceptions ========== ========== 4CIF 704x576 1) 704x480 2) 2CIF 704x288 1) 704x240 2) CIF 352x288 1) 352x240 2) QCIF 3) 176x144 1) 3) 176x120 2) 3) 1) Only available for PAL cameras 2) Only available for NTSC cameras 90/270 degress rotation is not supported.