FIRMWARE RELEASE NOTES ====================== Products affected: AXIS Q1602/Q1602-E Network Camera Release date: 2012-06-04 Release type: Production Firmware version: 5.40.3.3 File name: Q1602_5_40_3_3.bin Preceding release: 5.40.3.2 AMC version: 6.0.6.7-1 ------------------------------------------------------------------------------ UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management 2.0, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. RELEASE 5.40.3.3 ================ Corrections =========== 5.40.3.3:C01 Several adjustments for usage in an AVHS system. Known Bugs/Limitations ====================== 5.40.3.3:L01 Removing and reinserting SD card during recording is not recommendable. 5.40.3.3:L02 With audio enabled, the initial connection latency is increased. 5.40.3.3:L03 Remote back focus operation will be disabled when the temperature is too low. Information will be shown in system log. 5.40.3.3:L05 A combination of a high bandwidth continuous recording and a lot of small recodings can result in disc full. The automatic clean up will stop at the point and the user have to manualy remove recordings. 5.40.3.3:L06 If you set max gain to a low value, e.g. 0, the IR cut filter may not switch back on automatically. 5.40.3.3:L07 Using modifiers like %c in a network share upload event does not work. 5.40.3.3:L08 Multiple simultaneous recordings to SD cards and network shares can degrade the performance of the system. 5.40.3.3:L09 The micophone input level is by default quite high. Workaround: Lower the input gain to reach an appropriate level 5.40.3.3:L10 Custom Firmware cannot be loaded Application Developer Information ================================= The AXIS VAPIX Application Programming Interface is supported by the AXIS Q1602/Q1602-E. The following groups are supported by this product. For more information, please refer to the AXIS VAPIX HTTP API specification version 3, part of the AXIS VAPIX API, available at www.axis.com. Group Exceptions ===== ========== General Image and Video Motion Detection I/O IP filter Audio Active Storage Temperature control Not Fan/Heater Focus Assistant Remote Zoom and Focus Only Remote Back Focus Positionable Iris Built in templates for dynamic parameters are: Template Group ======== ===== 'audioclipaction' Event.E#.Actions 'customexposurewindow' ImageSource.I#.Sensor 'daynightaction' Event.E#.Actions 'event' Event 'ftp_config' EventServers.FTP 'ftpaction' Event.E#.Actions 'http_config' EventServers.HTTP 'httpaction' Event.E#.Actions 'hwaction' Event.E#.Actions 'mediaclip' MediaClip 'motion' Motion 'nsdevice' NetworkShare 'recordaction' Event.E#.Actions 'smtpaction' Event.E#.Actions 'streamcache' StreamCache 'streamprofile' StreamProfile 'tcp_config' Eventservers.TCP 'tcpaction' Event.E#.Actions Supported AXIS VAPIX API Image Resolutions for AXIS Q1602/Q1602-E. Resolution Exceptions ========== ========== 768x576 720x576 640x480 480x360 320x240 240x180 160x120 640x360 480x270 320x180 240x135 160x90 640x400 480x300 320x200 160x100 704x576 1) 704x480 1) 384x288 1) 352x240 1) 192x144 1) 176x144 1) 176x120 1) 1) Not visible in web user interface