FIRMWARE RELEASE NOTES ====================== Products affected: AXIS Q1602/Q1602-E Network Camera Release date: 2012-04-19 Release type: Production Firmware version: 5.40.3.2 File name: Q1602_5_40_3_2.bin Preceding release: 5.40.3.1 AMC version: 6.0.6.7-1 ------------------------------------------------------------------------------ UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management 2.0, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. RELEASE 5.40.3.2 ============ Added features ============== 5.40.3.2:F1 Events can now be triggered based on a temperature sensor. 5.40.3.2:F2 Events can now be triggered based on "Network lost". Corrected problems ================== 5.40.3.2:C01 ACAP applications like VMD 2.1 are expected to work properly now. 5.40.3.2:C02 Fixed a connection problem with the AVHS client that could lead to infinite reconnect loop and criticials in the system log. 5.40.3.2:C03 AVHS proxy should now work. 5.40.3.2:C04 Fixed a performance problem with AVHS when using HTTPS. 5.40.3.2:C05 Mute setting for Audio input gain is now working. 5.40.3.2:C06 Administrators other than root can now configure ACAP applications. 5.40.3.2:C07 Fixed a problem with RTP tunneled over RTSP and HTTP that could lead to terminated RTP sessions because of corrupt payload data. 5.40.3.2:C08 Fixed a problem with UPnP NAT traversal that lead to NAT traversal not working with several router brands. 5.40.3.2:C09 Modifier #t for event notifications should now work as expected. 5.40.3.2:C10 Fixed a problem with scheduled events not triggering at correct time. 5.40.3.2:C11 Fixed a problem with AVHS "always" register method. 5.40.3.2:C12 Fixed a problem with the VAPIX I/O interface. 5.40.3.2:C13 Fixed a problem with apps/focusd restarting and generating critical log messages. 5.40.3.2:C14 An issue with audio buzz when running longer time has been corrected. Known Bug/Limitations ===================== 5.40.3.2:L01 Removing and reinserting SD card during recording is not recommendable. 5.40.3.2:L02 With audio enabled, the initial connection latency is increased. 5.40.3.2:L03 Remote back focus operation will be disabled when the temperature is too low. Information will be shown in system log. 5.40.3.2:L04 A combination of a high bandwidth continuous recording and a lot of small recodings can result in disc full. The automatic clean up will stop at the point and the user has to manualy remove recordings. 5.40.3.2:L05 If you set max gain to a low value, e.g. 0, the IR cut filter may not switch back on automatically. 5.40.3.2:L06 Using modifiers like %c in a network share upload event does not work. 5.40.3.2:L07 Multiple simultaneous recordings to SD cards and network shares can degrade the performance of the system. 5.40.3.2:L08 The micophone input level is by default quite high. Workaround: Lower the input gain to reach a appropriate level 5.40.3.2:L09 Custom Firmware cannot be loaded. Application Developer Information ================================= The AXIS VAPIX Application Programming Interface is supported by the AXIS Q1602/Q1602-E. The following groups are supported by this product. For more information, please refer to the AXIS VAPIX HTTP API specification version 3, part of the AXIS VAPIX API, available at www.axis.com. Group Exceptions ===== ========== General Image and Video Motion Detection I/O IP filter Audio Active Storage Temperature control Not Fan/Heater Focus Assistant Remote Zoom and Focus Only Remote Back Focus Positionable Iris Built in templates for dynamic parameters are: Template Group ======== ===== 'audioclipaction' Event.E#.Actions 'customexposurewindow' ImageSource.I#.Sensor 'daynightaction' Event.E#.Actions 'event' Event 'ftp_config' EventServers.FTP 'ftpaction' Event.E#.Actions 'http_config' EventServers.HTTP 'httpaction' Event.E#.Actions 'hwaction' Event.E#.Actions 'mediaclip' MediaClip 'motion' Motion 'nsdevice' NetworkShare 'recordaction' Event.E#.Actions 'smtpaction' Event.E#.Actions 'streamcache' StreamCache 'streamprofile' StreamProfile 'tcp_config' Eventservers.TCP 'tcpaction' Event.E#.Actions Supported AXIS VAPIX API Image Resolutions for AXIS Q1602/Q1602-E. Resolution Exceptions ========== ========== 768x576 720x576 640x480 480x360 320x240 240x180 160x120 640x360 480x270 320x180 160x90 640x400 480x300 320x200 160x100 176x144 704x576 1) 704x480 1) 704x288 1) 704x240 1) 384x288 1) 352x288 1) 352x240 1) 240x135 1) 192x144 1) 176x120 1) 80x50 1) 1) Not visible in web user interface