FIRMWARE RELEASE NOTE
=====================

Products affected:        P5655-E

Release date:             2019-06-14

Release type:             Production

Firmware version:         9.30.1

Preceding release:        First release

--------------------------------------------------------------------------------

Upgrade instructions
====================

Upgrade the firmware according to the instructions given at
https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade 
or howtoupgrade.txt, which is included in the firmware folder.


New features in 9.30.1
================================================================================

9.30.1:F1
Added an API for mDNS-SD.

9.30.1:F2
TLS1.0 and TLS1.1 is now disabled by default.

9.30.1:F3
Added support for source-specific multicast (SSM) via http://ip-address/axis-
media/ssm/media.amp.

The following parameters need to be configured prior to initiating a video
stream via SSM:

Network.RTP.R#.VideoAddress
Network.RTP.R#.VideoPort
Network.RTP.R#.AudioAdress
Network.RTP.R#.AudioPort

9.30.1:F4
Added support for TLSv1.3.

9.30.1:F5
The classic GUI has been deprecated and is now removed to increase overall cyber
security level.

9.30.1:F6
Upgraded Apache to version 2.4.39 to increase overall minimum cyber security
level.

9.30.1:F7
Updated Video Motion Detection to version 4.3.5.

9.30.1:F8
It is now possible to upload .PFX formatted certificates with a total size of
102400 bytes. The previous limit was 1/10 of it.

9.30.1:F9
Added support for "Wait at least time x" before re-running an configured action
rule.


Known Bugs/Limitations
================================================================================

9.30.1:L1
There might be features currently explained in the help files that may not be
supported by the camera.

9.30.1:L1
There might be event settings available that is not applicable to the product
with the current setup.

9.30.1:L1
It is recommended to perform firmware recovery to rollback the products firmware
to a previous version.

Downgrading the products firmware through the usual firmware upgrade process can
cause configuration and ACAP loss. It is recommended to perform a factory
default afterwards.


Supported AXIS VAPIX API Image Resolutions for P5655-E
================================================================================

Resolution  Exceptions
==========  ==========

1920x1080
1280x720
800x450
480x270
320x180

1400x1050   1)
1280x960    1)
1024x768    1)
1024x640    1)
1024x576    1)
800x600     1)
768x576     1)
720x576     1)
704x576     1)
704x480     1)
640x480     1)
640x400     1)
640x360     1)
704x288     1)
480x360     1)
704x240     1)
480x300     1)
384x288     1)
352x288     1)
352x240     1)
320x240     1)
320x200     1)
240x180     1)
240x135     1)
192x144     1)
176x144     1)
176x120     1)
160x120     1)
160x100     1)
160x90      1)
80x50       1)
analyze     1)

1) Not visible in web user interface