FIRMWARE RELEASE NOTES
======================

Products affected: AXIS P5522-E PTZ Dome Network Camera

Release date:      2012-03-30

Release type:      Production

Firmware version:  5.25.1

File name:         P5522-E_5_25_1.bin

Preceding release: 5.25

AMC version:       5.9.9.0-1


------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management 3.0, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named
howtoupgrade.txt.


RELEASE 5.25.1
==============

5.25.1 is a production service release for AXIS P5522-E.


Corrected problems
==================

5.25.1:C01 Corrected the SSP/PPS H264 parameters time stamps,
            now it will be the same as the following I-frame.
5.25.1:C02 Socket leak during Guard Tour which caused
            the camera to slow down.
5.25.1:C03 Ethernet driver and streaming fixes added,
            should correct some cases where the camera was left unresponsive.
5.25.1:C04 LLDP broadcasts the proper MAC address.
5.25.1:C05 Improved SHTTP client.
5.25.1:C06 Center command with specified imageheight works properly.


Known limitations
=================
5.25.1:L01 Motion detection reacts to IR cut filter.

5.25.1:L02 PKCS#12 with encrypted certificates are not time verified.

5.25.1:L03 SNMP test 5.4.0.1 fails over IPv6.

5.25.1:L04 SNMPv3 SilverCreek 4.20.8 (IPv6).

5.25.1:L05 RTSP clients timeout when syncing unit to computertime.

5.25.1:L06 Error when removing micro SD card without unmounting it first.

5.25.1:L07 Criticals found in system log at restart when Guard tour is running.

5.25.1:L08 Control panel hidden behind video sometimes.

5.25.1:L09 After a factory the default PTZ home position not defined when the PTZ framework is told to go to the home position; the the camera will remain at the calibration point.

5.25.1:L10 6.2.24 - Onvif failing test case: "This is due to a bug in the test tool and test specification, i.e. the Axis interpretation is correct.".

5.25.1:L11 No warning message in log when pre-trigger buffer is too large.

5.25.1:L12 ONVIF speed param is ignored by the camera.

5.25.1:L13 MJPG recordings to SD card with too high bitrate may cause oom kill of monolith.

5.25.1:L14 Relative tilt applied despite tilt control being disabled when Auto-flipping.

5.25.1:L15 From time and duration not respected in continuous recording <5 min; Cue points not available until a MKV-file is finalized.

5.25.1:L16 Guard Tour View time is longer than stated in setup due to Focus/Iris taking some extra time.


APPLICATION DEVELOPER Information
=================================

The AXIS VAPIX Application Programming Interface is supported by the AXIS
P5522-E.

The following groups are supported by the AXIS P5522-E.
For more information, please refer to the AXIS VAPIX HTTP API specification
version 3, part of the AXIS VAPIX API, available at www.axis.com.

Group             Exceptions
=====             ==========
General
Image and Video
PTZ               PTZ driver update (ptzupdate.cgi), PTZ administration
                  (ptzadmin.cgi), set PTZ parameters (ptzparam.cgi)
Motion Detection
I/O
IP filter

Built in templates for dynamic parameters are:

Template              Group
========              =====
'event'               Event
'ftpaction'           Event.E#.Actions
'guardtouraction'     Event.E#.Actions
'httpaction'          Event.E#.Actions
'hwaction'            Event.E#.Actions
'ptzaction'           Event.E#.Actions
'ptzsensoraction'     Event.E#.Actions
'recordaction'        Event.E#.Actions
'smtpaction'          Event.E#.Actions
'tcpaction'           Event.E#.Actions
'ftp_config'          EventServers.FTP
'http_config'         EventServers.HTTP
'tcp_config'          Eventservers.TCP
'guardtour'           GuardTour
'tour'                GuardTour.G#.Tour
'motion'              Motion
'button'              PTZ.Auxiliary.A1.Button
'ptzlocator'          PTZ.Locator.L#.Zone
'position'            PTZ.Preset.P0.Position
'user_ctlqueue'       PTZ.UserCtlQueue
'streamprofile'       StreamProfile
'streamcache'         StreamCache

Supported AXIS VAPIX API Image Resolutions for AXIS P5522-E


Resolution  Exceptions
==========  ==========
D1
720x576     1)
720x480        2)
4CIF
704x576     1)
704x480        2)
2CIF
704x288     1)
704x240        2)
CIF
352x288     1)
352x240        2)
QCIF
176x144     1)
176x120        2)

1) Only available for 50Hz cameras
2) Only available for 60Hz cameras

90/270 degress rotation is not supported.