FIRMWARE RELEASE NOTES ====================== Products affected: AXIS P3344 Fixed Dome Network Camera Release date: 2012-02-29 Release type: Production Firmware version: 5.40.9 File name: P3344_5_40_9.bin Preceding release: 5.40.4 AMC version: 6.0.6.7-1 ------------------------------------------------------------------------------ UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. Corrections in 5.40.9 since 5.40.4 ================================== 5.40.9:C01 Modifier #t for event notification works as expected. 5.40.9:C02 GOV length 1 in combination with enabled User Data does not give black image anymore. 5.40.9:C03 Guard Tour runs without stopping after a few hours. 5.40.9:C04 Custom schedules work as expected. 5.40.9:C05 Motion JPEG stream is no longer corrupted when rotated 90 and 270 degrees. 5.40.9:C06 Special characters in e-mail subject are now represented correctly. 5.40.9:C07 Frame size limit of Motion JPEG when saving to network drive works. 5.40.9:C08 HTTP port does not need to be specified when running RTP over RTSP over HTTP. 5.40.9:C09 Ethernet driver has been improved. 5.40.9:C10 Default viewer set to still image does not affect configuration pages where stream appearance is expected. 5.40.9:C11 HTTP notification in an action rule gives a valid URI. 5.40.9:C12 Setting parameter Network.DefaultRouter to a new value takes effect even if the product is not restarted. 5.40.9:C13 The problem that camera reaches an error state at certain temperature is now fixed. Known Bugs/Limitations ====================== 5.40.9:L01 It is recommended to unmount the SD Card before ejecting it. 5.40.9:L02 Recordings made with firmware earlier than 5.20 will not be readable on the SD Card from the 5.40 firmware. Backup important recordings and reformat the SD Card after the firmware upgrade. 5.40.9:L03 Remote back focus operation will be disabled when the temperature is too low. Information will be shown in system log. 5.40.9:L04 Check and repair is only available if the file system is ext4. 5.40.9:L05 Recording streams to SD Card with a total bit rate above 12Mbit/sec may cause missing frames/sequences. 5.40.9:L06 When using action rule resulting in short recordings, it is recommended to extend post-event time. 5.40.9:L07 With audio enabled, the initial connection latency is increased. 5.40.9:L08 Sometimes IR filter switches between ON/OFF after factory default when illuminance is 7-10 lux. 5.40.9:L09 Color parameter when pulling RTSP stream with color=0 doesn't have effect. Application Developer Information ================================= The AXIS VAPIX Application Programming Interface version 3 is supported by the AXIS P3344. For more information, please refer to the AXIS VAPIX HTTP API specification version 3, part of the AXIS VAPIX API, available at www.axis.com. Supported AXIS VAPIX API Image Resolutions for AXIS P3344 Resolution Exceptions ========== ========== 1280x800 1280x720 1024x768 1024x640 800x600 800x500 800x450 640x480 640x400 640x360 480x360 480x300 480x270 320x240 320x200 320x180 240x180 176x144 160x120 160x100 160x90 1440x900 1) 768x576 1) 720x576 1) 704x576 1) 704x480 1) 704x288 1) 704x240 1) 384x288 1) 352x288 1) 352x240 1) 240x135 1) 192x144 1) 176x120 1) 80x50 1) 1) Not visible in web user interface