FIRMWARE RELEASE NOTES ====================== Products affected: AXIS P3301 Network Camera Release date: 2010-03-22 Release type: Production Firmware version: 5.11.2 File name: P3301_5_11_2.bin Preceding release: P3301_5_11_1.bin AMC version: 5.8.5.0-1 ------------------------------------------------------------------------------ UPGRADE INSTRUCTIONS ==================== Important upgrade instructions for cameras running version 5.01! The upgrade to version 5.11.1 firmware or later upgrade must be preceeded by an upgrade to version 5.09 due to incompatibility between the version 5.01 and later firmware releases. Upgrading from version 5.01 to 5.10 or later directly will cause the upgrade to fail. Please read the release notes carefully. The firmware can be upgraded using Axis Camera Management 3.0, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. RELEASE 5.11.2 ============== Improvements since 5.11.1 ========================= 5.11.2:I01 Improvements in multicast handling. Client Transport Settings has been added to Plain Config Corrections since 5.11.1 ======================== 5.11.2:C01 Correction to ONVIF due to failing GetCapabilities() ONVIF conformant test. Known bugs ========== 5.11.2:L01 When using manually triggered events it's possible to trigger event number two on top of event number one. If for example activating an ouput port for 10 seconds, waiting 5 seconds then activating the event again will cause port to be active for another 10 seconds after the first event has elapsed. Activating the trigger more than two times won't have any effect. 5.11.2:L02 During automatic license installation, using a information with swedish letters å, ä, ö will not work. The server will respond with "400 Bad Request". This is because of the browser encoding these letters as iso-8859-1 and not UTF-8. 5.11.2:L03 In Internet Expolorer 7 or 8 if one forgets to enter an application when using application trigger a script error occur. 5.11.2:L04 When using remote desktop or vmware: It is not possible to configure any lines, windows or polygons when streaming with rtsp. 5.11.2:L04 RTSP server is limited to use URL's no longer than 3000 bytes. 5.11.2:L05 When a meta-data stream is started the second time there might be old images in the first burst. 5.11.2:L06 In the webpage for setting root password the link to the helpage doesn't work. 5.11.2:L07 WDR (Wide Dynamic Range) is not mentioned in the help pages. 5.11.2:L08 Multicast for ipv6 will only work if ipv4 is enabled. Application Developer Information ================================= The AXIS P3301 supports AXIS VAPIX API - Application Programming Interface version 3. Backwards compatibility is maintained as far as possible, but some changes have been necessary. The following groups are still supported from the AXIS P3301 from AXIS VAPIX HTTP API specification version 2, but discrepancies may occur. For more information about version 2 please refer to AXIS VAPIX API available at www.axis.com. Group Exceptions ===== ========== General Image and Video Video status Motion Detection I/O IP filter Audio Built in templates for dynamic parameters: Template Group ======== ===== 'event' Event 'ftpaction' Event.E#.Actions 'ftp_config' EventServers.FTP 'httpaction' Event.E#.Actions 'http_config' EventServers.HTTP 'hwaction' Event.E#.Actions 'motion' Motion 'smtpaction' Event.E#.Actions 'tcpaction' Event.E#.Actions 'tcp_config' EventServers.TCP Supported AXIS VAPIX API Image Resolutions: Resolution Exceptions ========== ========== 640x480 480x360 320x240 240x180 176x144 160x120