FIRMWARE RELEASE NOTE
======================

Products affected: P1448-LE

Release date:      2020-09-23

Release type:      Production

Firmware version:  9.80.2.3

Preceding release: 9.80.2.2

--------------------------------------------------------------------------------

This is the LTS-2020 track.

Upgrade recommendations
========================

If you need to step up your firmware several steps, it is recommended to do an
intermediate upgrade to LTS-tracks before proceeding.
For example if the current version is 7.40 and you want to upgrade to 9.80.
Then you should do the upgrade in these steps: 7.40 => 8.40 LTS => 9.80.

Upgrade the firmware according to the instructions given in howtoupgrade.txt,
which is included in the firmware folder or at the firmware portal at
https://www.axis.com


NOTE
========================

For latest information about Axis Cybersecurity, see:
https://www.axis.com/support/product-security


Corrections in 9.80.2.3 since 9.80.2.2
=======================================

9.80.2.3:C01
General improvements to the LTS-2020 platform.

9.80.2.3:C02
Reduced time to built-up an RTSP video stream by 30% and more.

9.80.2.3:C03
Corrected an issue in FTP Send Image Action Rule that caused disabling of "Use Temporary
File" checkbox to be ignored.

9.80.2.3:C04
Reduced time for the web interface to load.

9.80.2.3:C05
Updated Apache to version 2.4.46 to increase overall cyber security level.

9.80.2.3:C06
Corrected an issue that caused incorrect requests to be sent when testing passive mode FTP
recipients.

9.80.2.3:C07
Corrected an issue that caused an error message to pop-up when pressing the test button of
an event using HTTP recipients.

9.80.2.3:C08
The following HTTP headers are now configured per default to increase overall
cybersecurity level: 
X-Frame-Options: SAMEORIGIN 
X-Content-Type-Options: nosniff
X-XSS-Protection: 1; mode=block.


Corrections in 9.80.2.2 since 9.80.2
=====================================

9.80.2.2:C01
General improvements to the LTS 2020 platform.

9.80.2.2:C02
Corrected an issue in setcleanupmaxage.cgi that caused changed settings not to be applied
directly.

9.80.2.2:C03
Corrected an issue that caused old recordings to not be removed after their retention
period was expired.

9.80.2.2:C04
Corrected an issue that caused overlays to blink randomly while adding new streams.

9.80.2.2:C05
Corrected an issue that sometimes caused event triggered recordings to fail.

9.80.2.2:C06
Updated Curl to version 7.69.1 to increase overall cybersecurity level.

9.80.2.2:C07
Corrected an issue that made Digital PTZ malfunction in combination with auto rotation.


Corrections in 9.80.2 since 9.80.1.1
=====================================

9.80.2:C01
General improvements to the LTS 2020 platform.

9.80.2:C02
Corrected an issue in the MQTT Client that caused selected QoS not to be used when
publishing events.

9.80.2:C03
Corrected an issue in the MQTT Client that caused source fields not to be sent.

9.80.2:C04
Updated Apache to version 2.4.43 to increase overall cyber security level.

9.80.2:C05
Update OpenSSL to version 1.1.1g to increase overall cyber security level.

9.80.2:C06
Added possibility to retrieve the device Owner Authentication Key (OAK) in the web GUI.
Note that this functionality requires that the product have direct access to the internet.

9.80.2:C07
Corrected an issue that sometimes made it impossible to edit action rules after upgrade.


Known Bugs/Limitations
================================================================================

9.70.1:L1
It is not possible to upgrade the product from 9.60 to any other release while
having SOCKS proxy configured in the product.

9.40.1:L1
There might be event settings available that is not applicable to the product
with the current setup.

9.30.1:L1
There might be features currently explained in the help files that may not be
supported by the camera.

9.10.1:L1
It is recommended to perform firmware recovery to rollback the products firmware
to a previous version. Downgrading the products firmware through the usual
firmware upgrade process can cause configuration and ACAP loss. It is
recommended to perform a factory default afterwards.

9.10.1:L2
Parts of the privacy mask may become invisible in rare occasions during
configuration. If this happens, please try to modify the mask slightly.

9.10.1:L3
If using any of following analytics VMD/CLD/DAT/Guard Suite (Motion, Fence &
Loitering) together with view areas and digital PTZ, the detection is offset and
therefore will give an inaccurate detection.


Supported AXIS VAPIX API Image Resolutions for P1448-LE
================================================================================

Resolution    Exceptions
------------  ------------
3840x2160
3072x1728
2720x1536
2592x1944
2560x1920
2560x1600
2560x1440
2432x1824
2304x1728
2048x1536
1920x1200
1920x1080
1440x900
1280x800
1280x720
1024x768
1024x640
800x600
800x500
800x450
640x480
640x400
640x360
480x360
480x300
480x270
320x240
320x200
320x180
240x180
176x144
160x120
160x100
160x90

1400x1050     1)
768x576       1)
720x576       1)
704x576       1)
704x480       1)
704x288       1)
704x240       1)
384x288       1)
352x288       1)
352x240       1)
192x144       1)
176x120       1)
96x64         1)
80x50         1)


1) Not visible in web user interface