FIRMWARE RELEASE NOTES
                        ======================

Products affected: AXIS P1346/P1346-E Network Camera

Release date:      2015-04-24

Release type:      Production

Firmware version:  5.40.9.6

File name:         P1346_5_40_9_6.bin

Preceding release: 5.40.9.5

AMC version:       6.0.6.7-1

------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named
howtoupgrade.txt.


Improvements
============

5.40.9.6:I01  Added gdbserver to simplify ACAP development.

5.40.9.6:I02  Moved Moscow to GMT+3.

5.40.9.6:I03  Solved issue with events stability.

5.40.9.6:I04  Use identity association in DHCPv6 solicit messages.

5.40.9.6:I05  Fixed a memory leak in web services.

5.40.9.6:I06  Audio detection default level set to 100.

5.40.9.6:I07  SSLv2 and SSLv3 disabled by default.

5.40.9.6:I08  Solved issues with analytics ACAPs.

5.40.9.6:I09  Use of signed applets.

5.40.9.6:I10  SDP file for always multicast now available for various view areas.

5.40.9.6:I11  Removed the 10-parameter limit in ACAP.

5.40.9.6:I12  Solved I-frame identification issue when GOV=1.

5.40.9.6:I13  Use of OpenSSL R0.9.8za.

5.40.9.6:I14  Privacy masks can be created in Safari.

5.40.9.6:I15  Plugged an object leak in the detection system.

5.40.9.6:I16  Solved ONVIF stability issues.

5.40.9.6:I17  Support for IE 11. Empty your browser cache if you experience issues.

5.40.9.6:I18  Solved a respawn issue when using digital PTZ.


Known Bugs/Limitations
======================

5.40.9.6:L01  It is recommended to unmount the SD Card before ejecting it.

5.40.9.6:L02  Recordings made with firmware earlier than 5.20 will not be readable
              on the SD Card from the 5.40 firmware. Backup important recordings and
              reformat the SD Card after the firmware upgrade.

5.40.9.6:L03  Remote back focus operation will be disabled when temperature
              is too low. Information will be shown in the system log.

5.40.9.6:L04  Check and repair is only available if the file system is ext4.

5.40.9.6:L05  Recording streams with a total bit rate above
              12Mbit/sec to SD Card may cause missing frames/sequences.

5.40.9.6:L06  When using action rule resulting in short recordings, it is recommended
              to extend post-event time.

5.40.9.6:L07  With audio enabled, the initial connection latency increases.

5.40.9.6:L08  Sometimes IR cut filter switches between ON/OFF after factory default when
              illuminance is 7-10 lux.

5.40.9.6:L09  Color parameter has no effect when pulling RTSP stream with color=0.

5.40.9.6:L10  Sensor capture mode should be set during the initial product
              configuration as it affects the available resolutions. Changing it in
              real time requires other resolution related configuration changes on the
              camera and possibly a recording software. For example, if a resolution
              that is not available for one capture mode is requested, the reply will
              be "bad request".

5.40.9.6:L11  It may be necessary to disable both "Advanced video
              rendering" and "Enable overlays" in the Control Panel -> AXIS Media
              Control in order to get a smoother H.264 video in Live view in 3MP and HDTV highest
              resolution.

5.40.9.6:L12  Local recording playback fails when using Motion JPEG with resolution
              2048x1536 and associated audio. Workaround: Use H.264 instead.


Application Developer Information
=================================

The AXIS VAPIX Application Programming Interface version 3 is supported by the
AXIS P1346/P1346-E. For more information, please refer to the AXIS VAPIX HTTP API specification
version 3, part of the AXIS VAPIX API, available at www.axis.com.


Supported AXIS VAPIX API Image Resolutions for AXIS P1346/P1346-E.

Resolution  Exceptions
==========  ==========

2048x1536   2)
1920x1080   3)
1600x1200   4)
1280x1024
1280x960
1280x720
1024x768
800x600
800x450
640x480
640x360
480x360
480x270
320x240
320x180
240x180
176x144
160x120
160x90

1440x900    1)
768x576     1)
704x576     1)
704x480     1)
704x288     1)
704x240     1)
384x288     1)
352x288     1)
352x240     1)
240x135     1)
192x144     1)
176x120     1)

1) Not visible in web user interface
2) Only available in 3MP capture mode
3) Not available in 2MP capture mode
4) Not available in HDTV capture mode