FIRMWARE RELEASE NOTES ====================== Products affected: AXIS P1346/P1346-E Network Camera Release date: 2013-05-14 Release type: Production Firmware version: 5.40.9.4 File name: P1346_5_40_9_4.bin Preceding release: 5.40.9.3 AMC version: 6.0.6.7-1 ------------------------------------------------------------------------------ UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. Improvements in 5.40.9.4 since 5.40.9.3 ======================================= 5.40.9.4:I01 Better constant bitrate algorithm. 5.40.9.4:I02 Fix for SD-card corruption. 5.40.9.4:I03 ONVIF stability fixes. 5.40.9.4:I04 New version of libupnp without buffer overflow vulnerabilities. 5.40.9.4:I05 TTL value for always multicast is taken into account. 5.40.9.4:I06 SDP for always multicast available to viewer users. 5.40.9.4:I07 Solved connection issues to AVHS servers. 5.40.9.4:I08 Improved TCP notification stability. 5.40.9.4:I09 Improved stability when using AxisNS. 5.40.9.4:I10 No extra backslash added on a FTP server when using a domain\username scheme. Known Bugs/Limitations ====================== 5.40.9.4:L01 It is recommended to unmount the SD Card before ejecting it. 5.40.9.4:L02 Recordings made with firmware earlier than 5.20 will not be readable on the SD Card from the 5.40 firmware. Backup important recordings and reformat the SD Card after the firmware upgrade. 5.40.9.4:L03 Remote back focus operation will be disabled when temperature is too low. Information will be shown in the system log. 5.40.9.4:L04 Check and repair is only available if the file system is ext4. 5.40.9.4:L05 Recording streams with a total bit rate above 12Mbit/sec to SD Card may cause missing frames/sequences. 5.40.9.4:L06 When using action rule resulting in short recordings, it is recommended to extend post-event time. 5.40.9.4:L07 With audio enabled, the initial connection latency increases. 5.40.9.4:L08 Sometimes IR cut filter switches between ON/OFF after factory default when illuminance is 7-10 lux. 5.40.9.4:L09 Color parameter has no effect when pulling RTSP stream with color=0. 5.40.9.4:L10 Sensor capture mode should be set during the initial product configuration as it affects the available resolutions. Changing it in real time requires other resolution related configuration changes on the camera and possibly a recording software. For example, if a resolution that is not available for one capture mode is requested, the reply will be "bad request". 5.40.9.4:L11 It may be necessary to disable both "Advanced video rendering" and "Enable overlays" in the Control Panel -> AXIS Media Control in order to get a smoother H.264 video in Live view in 3MP and HDTV highest resolution. 5.40.9.4:L12 Local recording playback fails when using Motion JPEG with resolution 2048x1536 and associated audio. Workaround: Use H.264 instead. Application Developer Information ================================= The AXIS VAPIX Application Programming Interface version 3 is supported by the AXIS P1346/P1346-E. For more information, please refer to the AXIS VAPIX HTTP API specification version 3, part of the AXIS VAPIX API, available at www.axis.com. Supported AXIS VAPIX API Image Resolutions for AXIS P1346/P1346-E. Resolution Exceptions ========== ========== 2048x1536 2) 1920x1080 3) 1600x1200 4) 1280x1024 1280x960 1280x720 1024x768 800x600 800x450 640x480 640x360 480x360 480x270 320x240 320x180 240x180 176x144 160x120 160x90 1440x900 1) 768x576 1) 704x576 1) 704x480 1) 704x288 1) 704x240 1) 384x288 1) 352x288 1) 352x240 1) 240x135 1) 192x144 1) 176x120 1) 1) Not visible in web user interface 2) Only available in 3MP capture mode 3) Not available in 2MP capture mode 4) Not available in HDTV capture mode