FIRMWARE RELEASE NOTE
=====================

Products affected:        M3205-LVE/M3206-LVE

Release date:             2020-04-03

Release type:             Production

Firmware version:         9.70.1.5

Preceding release:        9.70.1

--------------------------------------------------------------------------------

Upgrade instructions
====================

Upgrade the firmware according to the instructions given at
https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade
or howtoupgrade.txt, which is included in the firmware folder.


Features in 9.70.1
================================================================================

9.70.1:F1
Added support for Session Initiation Protocol (SIP).

9.70.1:F2
Added support for resolve domain name trap addresses in SNMP.

9.70.1:F3
SEI (Supplemental enhancement information) messages is since 9.60.1 included in
recorded H.264 videos.

9.60.1:F1
Added possibility to select stream profile for continuous recordings.

9.60.1:F2
Added possibility to set image rotation in ONVIF media profiles.

9.60.1:F3
Added Geolocation API. See VAPIX documentation for more information.

9.60.1:F4
Added possibility to copy action rules, schedules and recipients.

9.60.1:F5
Updated Video Motion Detection to version 4.4.3.

9.60.1:F6
Added NTP synchronization status to VAPIX Time API.

9.50.1:F1
Added support for dynamic overlays.

9.50.1:F2
Added support for setting image frequency in action rules.

9.50.1:F3
Updated Apache to version 2.4.41 to increase overall minimum cyber
security level.

9.50.1:F4
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber
security level.

9.50.1:F5
Updated Video Motion Detection to version 4.4.2.

9.50.1:F6
Added possibility to disable the web UI to increase overall minimum
cyber security level. The web UI can be disabled under System -> PlainConfig ->
System -> System WebInterface Disabled. To enable the web UI after it has been
disabled, the VAPIX parameterSystem.WebInterfaceDisabled must be set to "no".


Corrections in 9.70.1.5
================================================================================

9.70.1.5:C1
Improved system stability.


Corrections in 9.70.1
================================================================================

9.70.1:C1
Improved video streaming robustness in unstable network environments.

9.70.1:C2
Corrected a streaming issue that caused the RTSP server to omit the RTP-info
header on rare occasions.
This correction was already included in 9.60 but was missed in the release
notes.

9.70.1:C3
Improved cyber security by adding the possibility to disable Web-Service
Discovery (WS-Discovery).

9.70.1:C4
Corrected an issue that caused the EAP-START package not to be sent during IEEE
802.1x port authentication upon network link state change.

9.70.1:C5
Corrected an issue that removed information about recipients in the server
report.

9.70.1:C6
Corrected a streaming issue affecting RTSP tunneled via HTTPs.

9.70.1:C7
Corrected an issue with streaming H.264 using Axis T8705 with User Data enabled.

9.70.1:C8
Corrected an issue that caused configured view areas to change its size after an
firmware upgrade has been performed.

9.70.1:C9
Corrected Vendor class identifier for DHCP negotiation.

9.60.1:C1
Corrected an issue that caused the HTTP recipient URL to be cropped.

9.60.1:C2
Corrected the following security vulnerabilities:
CVE-2019-13377
CVE-2019-16275

9.50.1:C1
Improved Tampering Detection.

9.50.1:C2
Corrected an issue that could cause the web-interface to freeze upon action
rule configuration with Fence Guard.

9.50.1:C3
Improved recording robustness in the event of temporary storage loss.

9.50.1:C4
Increased the limit of concurrent HTTP requests for I/O related VAPIX
commands from 4 to 10.

9.50.1:C5
The deprecated parameter HTTPS.AllowSSLV3 has been removed completely now.


Known Bugs/Limitations
================================================================================

9.70.1:L1
It is not possible to upgrade the product from 9.60 to any other release while
having SOCKS proxy configured in the product.

9.50.1:L1
When HDMI is enabled, the 1920x1080 resolution is not available for
other clients.


Supported AXIS VAPIX API Image Resolutions for M3205-LVE/M3206-LVE
================================================================================
Resolution  Exceptions
==========  ==========

2304x1728   2)
2304x1296   3)
1920x1080
1280x960    2) 4)
1280x720
1024x768    2) 4)
1024x576
800x600     2) 4)
640x480     2) 4)
640x360
320x240     2) 4)

768x576     1)
704x576     1)
704x480     1)
384x288     1)
352x288     1)
320x240     1) 3)

1) Not visible in web user interface
2) 4MP (2304x1728)
3) 3MP (2304x1296)
4) 1080p (1920x1080)