FIRMWARE RELEASE NOTE
======================

Products affected: AXIS m3015

Release date:      2018-04-09

Release type:      Production

Firmware version:  7.15.5.1

File name:         M3015_7_15_5_1.bin

Preceding release: 7.15.5

--------------------------------------------------------------------------------

Upgrade instructions
====================

The firmware can be upgraded using Axis Camera Management, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named
howtoupgrade.txt.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 7.15.5.1 since 7.15.5
====================================

7.15.5.1:C01
Corrected critical vulnerability ACV-128401.


Known Bugs/Limitations
================================================================================

7.15.5.1:L1
Recording streams to SD Card with total bit rate above 12Mbit/sec may cause
missing frames/sequences.

7.15.5.1:L2
When choosing one of the exposure modes: flicker reduced or flicker free that is
does not have the same Hz as the capture frequency set in the camera the max
shutter will displayed as "custom" in the web gui.

7.15.5.1:L3
Number of different configured video streams is limited to maximum 4 by
hardware.


Supported AXIS VAPIX API Image Resolutions for AXIS m3015
================================================================================

Resolution  Exceptions
==========  ==========

1920x1080
1280x960
1280x720
1024x768
1024x576
800x600
640x480
640x360
352x240
320x240

768x576     1)
704x576     1)
704x480     1)
384x288     1)
352x288     1)

1) Not visible in web user interface