FIRMWARE RELEASE NOTES
          ======================

Products affected: AXIS M3005 Network Camera

Release date:      2012-08-14

Release type:      Production

Firmware version:  5.40.5.3

File name:         M3005_5_40_5_3.bin

Preceding release: M3005_5_40_5_2.bin

AMC version:       6.0.6.4-1

------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================
The firmware can be upgraded using Axis Camera Management, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named
howtoupgrade.txt.

Release 5.40.5.3
=================
5.40.5.3 is the third official production service release for the AXIS M3005


Corrections since 5.40.5.2
=======================
5.40.5.3:C01 No trigger data for H.264.

5.40.5.3:C02 Continuous respawning after boot when using fixed white balance.

Corrections since 5.40.5.1
=======================
5.40.5.2:C01 Collection of Help File errors and misplacements.

5.40.5.2:C02 IPV6 fails in Onvif.

5.40.5.2:C03 Add missing scope for ONVIF streaming profile.

Corrections since 5.40.5
=======================
5.40.5.1:C01 Image rotation on ov2715 Image is upside down and inverted


Known Bugs/Limitations
======================
5.40.5:L01 Removing and reinserting SD card during recording is not recommendable.

5.40.5:L02 Check and repair is only available if the file system is ext4.

5.40.5:L03 A combination of a high bandwidth continuous recording and a lot
	   of small recordings can result in disc full. The automatic clean up will
	   stop at that point and the user has to manually remove recordings.

5.40.5:L04 It's not possible to download recordings bigger than 4GB from the system.

5.40.5:L05 Using modifiers like %c in a network share upload event does not work.

5.40.5:L06 Moving a view area doesn't always work as expected.

5.40.5:L07 It's not possible to trigger action rules based on temperature.

5.40.5:L08 Multiple simultaneous recordings to SD cards and network shares
	   can degrade the performance of the system.

5.40.5:L09 Video stream becomes unaccessible while downloading crash report

5.40.5:L10 DSCP value for Event/Alarm over IPv4 is always 0

5.40.5:L11 Changing DSCP values might prompt for password

5.40.5:L12 Privacy mask can't be added in Chrome

5.40.5:L13 Video attributes might not be applied after a reboot

5.40.5:L14 Zoom bar is disabled until using zoom buttons

5.40.5:L15 Number of different configured video streams are limited by hardware.

5.40.5:L16 The JPEG images with a rsolution which is not a multiple of 16/8 
	   (width/height) will be truncated to the nearest value. For example if you 
	   request an image with 800x450 resolution then you will get 800x448.


Supported AXIS VAPIX API Image Resolutions for AXIS M3005.

Resolution  Exceptions
==========  ==========
1920x1080   
1280x1024     
1280x960      
1280x720
1024x768
800x600
800x450
640x480
640x360
480x360
480x270
352x240

768x576      1)
384x288      1)
320x240	     1)

1) Not visible in web user interface