FIRMWARE RELEASE NOTES ====================== Products affected: AXIS M3004 Network Camera Release date: 2013-01-24 Release type: Production Firmware version: 5.40.5.3 File name: M3004_5_40_5_3.bin Preceding release: 5.40.5.2 AMC version: 6.0.6.4-1 ------------------------------------------------------------------------------ UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. Corrections since 5.40.5.2 ========================== 5.40.5.3:C01 MAC address now properly sent in the H264 user data. Improvements since 5.40.5.2 =========================== 5.40.5.3:I01 ACAP applications can reserve the YUV buffer. This means that if no ACAP application is used then one more stream buffer will be available. Known Bugs/Limitations ====================== 5.40.5:L01 Removing and reinserting SD card during recording is not recommendable. 5.40.5:L02 Check and repair is only available if the file system is ext4. 5.40.5:L03 A combination of a high bandwidth continuous recording and a lot of small recordings can result in disc full. The automatic clean up will stop at that point and the user has to manually remove recordings. 5.40.5:L04 It's not possible to download recordings bigger than 4GB from the system. 5.40.5:L05 Using modifiers like %c in a network share upload event does not work. 5.40.5:L06 Moving a view area doesn't always work as expected. 5.40.5:L07 It's not possible to trigger action rules based on temperature. 5.40.5:L08 Multiple simultaneous recordings to SD cards and network shares can degrade the performance of the system. 5.40.5:L09 Video stream becomes unaccessible while downloading crash report 5.40.5:L10 DSCP value for Event/Alarm over IPv4 is always 0 5.40.5:L11 Changing DSCP values might prompt for password 5.40.5:L12 Privacy mask can't be added in Chrome 5.40.5:L13 Video attributes might not be applied after a reboot 5.40.5:L14 Zoom bar is disabled until using zoom buttons 5.40.5:L15 Number of different configured video streams are limited by hardware. 5.40.5:L16 The JPEG images with a rsolution which is not a multiple of 16/8 (width/height) will be truncated to the nearest value. For example if you request an image with 800x450 resolution then you will get 800x448. APPLICATION DEVELOPER Information ================================= The AXIS VAPIX Application Programming Interface version 3 is supported by this product. For more information please refer to the AXIS VAPIX HTTP API specification version 3 part of the AXIS VAPIX API available at www.axis.com. Supported AXIS VAPIX API Image Resolutions for AXIS M3004. Resolution Exceptions ========== ========== 1280x800 1280x720 1024x768 1024x640 800x600 800x500 800x450 640x480 640x400 640x360 480x360 480x300 480x270 380x270 352x240 1440x900 1) 768x576 1) 704x576 1) 704x480 1) 384x288 1) 352x288 1) 1) Not visible in web user interface