FIRMWARE RELEASE NOTE
======================

Products affected: M2026-LE

Release date:      2020-07-15

Release type:      Production

Firmware version:  9.80.2.2

Preceding release: 9.80.2

--------------------------------------------------------------------------------

This is the LTS 2020 track.

Upgrade recommendations
========================

If you need to step up your firmware several steps, it is recommended to do an
intermediate upgrade to LTS-tracks before proceeding.
For example if the current version is 7.40 and you want to upgrade to 9.80.
Then you should do the upgrade in these steps: 7.40 => 8.40 LTS => 9.80.

Upgrade the firmware according to the instructions given in howtoupgrade.txt,
which is included in the firmware folder or at the firmware portal at
https://www.axis.com


NOTE
========================

For latest information about Axis Cybersecurity, see:
https://www.axis.com/support/product-security


Corrections in 9.80.2.2 since 9.80.2
=====================================

9.80.2.2:C01
General improvements to the LTS 2020 platform.

9.80.2.2:C02
Corrected an issue in setcleanupmaxage.cgi that caused changed settings not to be applied
directly.

9.80.2.2:C03
Corrected an issue that caused old recordings to not be removed after their retention
period was expired.

9.80.2.2:C04
Corrected an issue that sometimes caused event triggered recordings to fail.

9.80.2.2:C05
Updated Curl to version 7.69.1 to increase overall cybersecurity level.


Corrections in 9.80.2 since 9.80.1
===================================

9.80.2:C01
General improvements to the LTS 2020 platform.

9.80.2:C02
Corrected an issue in the MQTT Client that caused selected QoS not to be used when
publishing events.

9.80.2:C03
Corrected an issue in the MQTT Client that caused source fields not to be sent.

9.80.2:C04
Updated Apache to version 2.4.43 to increase overall cyber security level.

9.80.2:C05
Update OpenSSL to version 1.1.1g to increase overall cyber security level.

9.80.2:C06
Added possibility to retrieve the device Owner Authentication Key (OAK) in the web GUI.
Note that this functionality requires that the product have direct access to the internet.

9.80.2:C07
Corrected an issue that sometimes made it impossible to edit action rules after upgrade.


Known Bugs/Limitations
================================================================================

9.70.1:L1
It is not possible to upgrade the product from 9.60 to any other release while
having SOCKS proxy configured in the product.

9.40.1:L1
There might be event settings available that is not applicable to the
product with the current setup.

9.30.1:L1
There might be features currently explained in the help files that may not
be supported by the camera.

9.10.1:L1
It is recommended to perform firmware recovery to rollback the products
firmware to a previous version. Downgrading the products firmware through the
usual firmware upgrade process can cause configuration and ACAP loss. It is
recommended to perform a factory default afterwards.

9.10.1:L2
It is not possible to set the capture mode in the installation wizard if
50Hz capture frequency is selected. Workaround: Set the capture mode under the
Image tab after finishing the installation wizard.


Supported AXIS VAPIX API Image Resolutions for M2026-LE
================================================================================

Resolution    Exceptions    Capture mode
------------  ------------  --------------
2688x1520                   1)
2560x1440                   2)
1920x1080                   1) 2)
1280x960                    1) 2)
1280x720                    1) 2)
1024x768                    1) 2)
1024x576                    1) 2)
800x600                     1) 2)
640x480                     1) 2)
640x360                     1) 2)
352x240                     1) 2)
320x240                     1) 2)


1) 4MP 2688x1520 (16:9) @ 25/30 fps
2) QHD 2560x1440 (16:9) @ 25/30 fps