FIRMWARE RELEASE NOTES ====================== Products affected: AXIS M1143-L Network Camera Release date: 2013-06-24 Release type: Production Firmware version: 5.40.10.6 File name: M1143-L_5_40_10_6.bin Preceding release: M1143-L_5_40_10_5.bin AMC version: 6.0.6.7-1 ------------------------------------------------------------------------ UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management 3.0, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. Improvements in 5.40.10.6 since 5.40.10.5 ========================================= 5.40.10.6:I01 New version of libupnp without buffer overflow vulnerabilities. 5.40.10.6:I02 Improved stability when using AxisNS. 5.40.10.6:I03 TTL value for always multicast is taken into account. 5.40.10.6:I04 SDP for always multicast available to viewer users. 5.40.10.6:I05 No extra backslash added on a FTP server when using a domain\username scheme. 5.40.10.6:I06 ACAP applications can reserve the YUV buffer. 5.40.10.6:I07 Improved TCP notification stability. 5.40.10.6:I08 Improved stability with AVHS and VMD 2.1. 5.40.10.6:I07 Solved connection issues to AVHS servers. 5.40.10.6:I10 MAC address now properly sent in the H264 user data. Known Bugs/Limitations ====================== 5.40.10.6:L01 Removing and reinserting SD card during recording is not recommendable. 5.40.10.6:L02 Check and repair is only available if the file system is ext4. 5.40.10.6:L03 A combination of a high bandwidth continuous recording and a lot of small recordings can result in disc full. The automatic clean up will stop at that point and the user has to manually remove recordings. 5.40.10.6:L04 It's not possible to download recordings bigger than 4GB from the system. 5.40.10.6:L05 Using modifiers like %c in a network share upload event does not work. 5.40.10.6:L06 Moving a view area doesn't always work as expected. 5.40.10.6:L07 Multiple simultaneous recordings to SD cards and network shares can degrade the performance of the system. 5.40.10.6:L08 Event recipient list incorrectly displayed in IE7. 5.40.10.6:L09 DSCP value for Event/Alarm over IPv4 is always 0. 5.40.10.6:L10 Changing DSCP values might prompt for password. 5.40.10.6:L11 Activating IR illumination buttons can impair live view performance. 5.40.10.6:L12 Zoom bar is disabled until using zoom buttons. 5.40.10.6:L13 Number of different configured video streams are limited by hardware. Application Developer Information ================================= The AXIS VAPIX Application Programming Interface version 3 is supported by this product. For more information please refer to the AXIS VAPIX HTTP API specification version 3 part of the AXIS VAPIX API available at www.axis.com. Group Exceptions ========== ========== General Image and Video Motion Detection Not done on any overview stream I/O IP filter Active Storage Digital PTZ Temperature Control Light Control Built in templates for dynamic parameters are: Template Group ======== ===== 'button' PTZ.Auxiliary.A1.Button 'daynightaction' Event.E#.Actions 'event' Event 'ftp_config' EventServers.FTP 'ftpaction' Event.E#.Actions 'guardtour' GuardTour 'guardtouraction' Event.E#.Actions 'http_config' EventServers.HTTP 'httpaction' Event.E#.Actions 'hwaction' Event.E#.Actions 'motion' Motion 'nsdevice' NetworkShare 'position' PTZ.Preset.P#.Position 'ptzaction' Event.E#.Actions 'recordaction' Event.E#.Actions 'smtpaction' Event.E#.Actions 'streamcache' StreamCache 'streamprofile' StreamProfile 'tcp_config' Eventservers.TCP 'tcpaction' Event.E#.Actions 'tour' GuardTour.G#.Tour 'user_ctlqueue' PTZ.UserCtlQueue Supported AXIS VAPIX API Image Resolutions: Resolution Exceptions ========== ========== 800x600 640x480 640x400 640x360 480x360 352x240 320x240 768x576 1) 704x576 1) 704x480 1) 384x288 1) 352x288 1) 1) Not visible in web user interface