FIRMWARE RELEASE NOTES ====================== Products affected: AXIS M1013 Network Camera Release date: 2012-06-14 Release type: Production Firmware version: 5.40.5 File name: M1013_5_40.bin Preceding release: n/a AMC version: 6.0.6.4-1 ------------------------------------------------------------------------------ UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. Release 5.40.5 ================= 5.40.5 is the first official production release for the AXIS M1013/M1014 Features ====================== Known Bugs/Limitations ====================== 5.40.3:L18122 Removing and reinserting SD card during recording is not recommendable. 5.40.3:L24316 Check and repair is only available if the file system is ext4. 5.40.3:L29580 A combination of a high bandwidth continuous recording and a lot of small recordings can result in disc full. The automatic clean up will stop at that point and the user has to manually remove recordings. 5.40.3:L28435 It's not possible to download recordings bigger than 4GB from the system. 5.40.3:L27901 Using modifiers like %c in a network share upload event does not work. 5.40.3:L26145 Moving a view area doesn't always work as expected. 5.40.3:L28738 It's not possible to trigger action rules based on temperature. 5.40.3:L27653 Multiple simultaneous recordings to SD cards and network shares can degrade the performance of the system. 5.40.5:L33936 Video stream becomes unaccessible while downloading crash report 5.40.5:L34090 DSCP value for Event/Alarm over IPv4 is always 0 5.40.5:L34091 Changing DSCP values might prompt for password 5.40.5:L34844 Privacy mask can't be added in Chrome 5.40.5:L35612 Video attributes might not be applied after a reboot 5.40.5:L35825 Zoom bar is disabled until using zoom buttons 5.40.5:L35026 Number of different configured video streams are limited by hardware. APPLICATION DEVELOPER Information ================================= The AXIS VAPIX Application Programming Interface version 3 is supported by this product. For more information please refer to the AXIS VAPIX HTTP API specification version 3 part of the AXIS VAPIX API available at www.axis.com. Built in templates for dynamic parameters are: Template Group ======== ===== 'button' PTZ.Auxiliary.A1.Button 'event' Event 'ftp_config' EventServers.FTP 'ftpaction' Event.E#.Actions 'guardtour' GuardTour 'guardtouraction' Event.E#.Actions 'http_config' EventServers.HTTP 'httpaction' Event.E#.Actions 'hwaction' Event.E#.Actions 'mediaclip' MediaClip 'motion' Motion 'nsdevice' NetworkShare 'position' PTZ.Preset.P#.Position 'ptzaction' Event.E#.Actions 'recordaction' Event.E#.Actions 'smtpaction' Event.E#.Actions 'streamcache' StreamCache 'streamprofile' StreamProfile 'tcp_config' Eventservers.TCP 'tcpaction' Event.E#.Actions 'tour' GuardTour.G#.Tour 'user_ctlqueue' PTZ.UserCtlQueue Supported AXIS VAPIX API Image Resolutions for AXIS M1013. Resolution Exceptions ========== ========== 800x600 800x500 800x450 640x480 640x400 640x360 480x360 480x300 480x270 352x240 320x240 768x576 1) 704x576 1) 704x480 1) 384x288 1) 352x288 1) 1) Not visible in web user interface