FIRMWARE RELEASE NOTE ===================== Products affected: AXIS C3003-E Release date: 2020-10-23 Release type: Production Firmware version: 10.0.2.2 Preceding release: 9.80.2.2 -------------------------------------------------------------------------------- Upgrade instructions ==================== NOTE 1: From the previous release and onwards the AXIS audio products will follow the same release naming as AXIS video products. The version name of this release is 10.0.2.2 and it is the successor of 9.80.2.2. NOTE 2: Firmware image version has been updated, meaning that upgrade to this release can only be done from FW version 1.97.1 or from FW version 9.80.2.2. Earlier releases are not supported, and the upgrade process will not allow it. Upgrade the firmware according to the instructions given at https://www.axis.com/en-ca/support/technical-notes/how-to-upgrade or howtoupgrade.txt, which is included in the firmware folder. New features in 10.0.2.2 =========================================================================== 10.0.2.2:F1 Introducing AXIS Audio Manager Edge – the replacement of AXIS Audio Player AXIS Audio Manager Edge is a free software application for managing up to 200 speakers in up to 20 zones. Embedded onboard AXIS network speakers, it's suitable for small to medium sites including stores, factories, warehouses, and offices. It lets you set up your audio devices in separate zones where you can play various kinds of live or scheduled content – each from a single source. You can also easily set up weekly content schedules, and built-in health monitoring ensures you always know the status of your system. For more information please visit https://www.axis.com/products/audio-management-software Known Bugs/Limitations =========================================================================== 10.0.2.2:L1 The system will NOT automatically convert the configuration of audio content or schedules from an existing AXIS Audio Player to the new AXIS Audio Manager Edge. This must be done manually. The AXIS Audio Player is still available in this release and it can be used as normal until the user is ready to perform a manual migration of content and schedules. 10.0.2.2:L2 After the introduction of AXIS Audio Manager Edge, the "System Overview" and "System Settings" options in the device configuration menu may be hidden. If you wish to enable these menu options, please start the AXIS Audio Player ACAP (found under the menu option "Services"). Then open the AXIS Audio Player and use the application (e.g. open the volume slider in the lower right corner and adjust the volume) Go back to the device configuration menu and refresh the browser page. The "System Overview" and the "System Settings" options should now be available. Please note that if you wish to stay with your current audio system or wish to continue using the Audio relay service API we strongly advise you to use the long term support (LTS) software track. (FW version 9.80.2.2) 10.0.2.2:L3 Currently no support for running AAM Edge in Safari or in Internet Explorer. 10.0.2.2:L4 It is currently not possible to create schedules across midnight. Schedules can be created from 00:00 to 23:59, but it is not possible to create a schedule from e.g. 21:00 to 03:00 the following day. This use case will have to be schedule with two entries. One entry from 21:00 to 23:59 and a second entry from 00:00 to 03:00 the following day. 10.0.2.2:L5 Switching between audio streams with various sampling rates will result in unexpected behavior and a glitching sound. Once the system has locked itself to a streaming sampling frequency the user must manually restart the system by rebooting the leader device to correct the problem. 10.0.2.2:L6 Uninstalled ACAPs will still show up in the list of available ACAPs when creating an ACAP music source. 10.0.2.2:L7 User cannot supply passphrase for encrypted SD cards in the device configuration application after factory default has been performed.