FIRMWARE RELEASE NOTE ===================== Products affected: AXIS C1004-E, C2005 Release date: 2021-07-09 Release type: Production Firmware version: 10.6.9.1 Preceding release: 10.6.0.1 -------------------------------------------------------------------------------- Upgrade instructions ==================== NOTE 1: Firmware image version has been updated in earlier FW version, meaning that upgrade to this release can only be done from FW version 1.97.1 or higher. If your device is currently running a FW version prior to 1.85.06 you need to upgrade in the following steps 1.65.032 -> 1.85.040 -> 1.97.1 or 9.80.3.1 -> 10.x or later FW version NOTE 2: If you need to do a firmware downgrade (and not a rollback) you now need to factory default the device. But you can revert to your previous firmware version and configuration by performing a rollback. Upgrade the firmware according to the instructions given at https://help.axis.com/axis-os#how-to-upgrade or howtoupgrade.txt, which is included in the firmware folder. Corrections in 10.6.9.1 since 10.6.0.1 ====================================== 10.6.9.1:C1 Fixed a FW upgrade problem that would occur on 1004-E, C2005 or C3003-E products, that were upgraded from 1.65.032 or earlier without ever being factory defaulted. 10.6.9.1:C2 Fixed a problem where AXIS Audio Manager Edge would break if the user deleted one or more duplicated announcement entries related to opening hours. Features in 10.6.0.1 ======================= AXIS Audio Manager Edge features -------------------------------- 10.6.0.1:F1 The sound calibration app in AXIS Audio Manager Edge has been extended with support for normalization. Normalization helps calibrate the sound levels between different sources and devices in the audio site. Please note that if you currently have a gain offset configured for a device, this will be migrated to the output gain configuration. FW features ----------------- 10.6.0.1:F2 Added actions "Play audio clip while active" and "Stop playing audio clip" to the event system for all audio products. 10.6.0.1:F3 Updated OpenSSL from version 1.1.1i to 1.1.1k Link to AXIS OS Release notes: https://www.axis.com/sv-se/products/online-manual/00000#t10168993 Features in 10.4.0.1 ======================= AXIS Audio Manager Edge features -------------------------------- 10.4.0.1:F1 Default Mapping of sources Devices that are not configured as intermediary device for Vapix Audio, Vapix Media Clip or SIP in AXIS Audio Manager Edge, will by default play incoming audio on the device itself. Default mapping of sources will not be enabled by default if upgrading from a previous Edge version but can be enabled manually in AXIS Audio Manager Edge system settings. 10.4.0.1:F2 Latency and sound profiles The calibration app in AXIS Audio Manager Edge now offers the ability to set your desired sound and latency profiles. It supports both default configuration for the site as well as detailed control for specific sources. It supports both default configuration for the site as well as detailed control for specific sources. 10.4.0.1:F3 2 way audio This enables you to setup a half-duplex call to the device. While sound is playing the microphone will be muted to prevent an echo of the speaker’s voice. To enable it you need to enable Echo Cancellation in HW2. You should also turn on full-duplex (to be able to get sound from the microphone), and adjust input gain according to your needs. AAM Edge automatically configure this for you if you use the device as a paging SIP/VAPIX Intercom source. 10.4.0.1:F4 AXIS Audio Manager Edge now supports the Safari browser. 10.4.0.1:F5 New languages in AXIS Audio Manager Edge Japanese, Korean, Russian, Traditional Chinese and Simplified Chinese are added to the list of supported languages [English, French, Italian, Spanish, German, Dutch, Polish, Portuguese (Brazilian)] FW features ----------- 10.4.0.1:F5 Echo cancellation in device configuration web With this feature it is possible to toggle echo cancellation on/off in the device configuration web. Echo cancellation enables microphone gating to avoid echo/feedback loops in half-duplex mode. 10.4.0.1:F6 OAK retrieval in device configuration web Added the possibility to retrieve the device Owner Authentication Key (OAK) in the device web interface. Note that this functionality requires that the product have direct access to the internet. 10.4.0.1:F7 A factory default is now mandatory when trying to downgrade the device. See How to downgrade at https://www.axis.com/support/firmware for more information. 10.4.0.1:F8 Updated Apache to version 2.4.46 10.4.0.1:F9 Updated OpenSSL to version 1.1.1i Link to AXIS OS Release notes: https://www.axis.com/sv-se/products/online-manual/00000#t10166046 Corrections in 10.4.5.1 since 10.4.0.1 ====================================== 10.4.5.1:C01 Fixed potential FW-upgrade problem, that could cause the device to not upgrade correctly and instead keep previous FW-version. Known limitations ================= 10.4.0.1:L1 When using MS Edge pre-chromium the user is unable to login after setting a password in the device configuration web. 10.0.2.4:L1 To use firmware 10.0.2.4 or higher together with AXIS Audio Manager Pro you must update AXIS Audio Manager Pro to version 3.3.1.3.33 or higher. 10.0.2.4:L2 If the user tries to add more than 40 devices at the same time in AXIS Audio Manager Edge the system might fail to add all devices. The user can still try again and add the remaining devices in one or more sessions. 10.0.2.1:L1 The system will NOT automatically convert the configuration of audio content or schedules from an existing AXIS Audio Player to the new AXIS Audio Manager Edge. This must be done manually. The AXIS Audio Player is still available in this release and it can be used as normal until the user is ready to perform a manual migration of content and schedules. 10.0.2.1:L2 After the introduction of AXIS Audio Manager Edge, the "System Overview" and "System Settings" options in the device configuration menu may be hidden. If you wish to enable these menu options, please start the AXIS Audio Player ACAP (found under the menu option "Services"). Then open the AXIS Audio Player and use the application (e.g. open the volume slider in the lower right corner and adjust the volume) Go back to the device configuration menu and refresh the browser page. The "System Overview" and the "System Settings" options should now be available. Please note that if you wish to stay with the previous audio system or wish to continue using the Audio relay service API, we strongly advise you to use the long-term support software track (LTS 9.80 track). 10.0.2.1:L3 No support for running AXIS Audio Manager Edge in Internet Explorer. 10.0.2.1:L4 It is currently not possible to create schedules across midnight in AXIS Audio Manager Edge. Schedules can be created from 00:00 to 23:59, but it is not possible to create a schedule from e.g. 21:00 to 03:00 the following day. This use case will have to be schedule with two entries. One entry from 21:00 to 23:59 and a second entry from 00:00 to 03:00 the following day. 10.0.2.1:L5 Uninstalled ACAPs will still show up in the list of available ACAPs when creating an ACAP music source in AXIS Audio Manager Edge. 10.0.2.1:L6 User cannot supply passphrase for encrypted SD cards in the device configuration application after factory default has been performed. 10.0.2.1:L7 When running firmware version 10.0.2.1 or higher the Soundtrack Your Brand ACAP must be updated to version 1.4 or higher.