FIRMWARE RELEASE NOTE ===================== Products affected: AXIS C1004-E, C2005 Release date: 2021-03-16 Release type: Production Firmware version: 10.4.0.1 Preceding release: 10.0.2.4 -------------------------------------------------------------------------------- Upgrade instructions ==================== NOTE 1: Firmware image version has been updated in earlier FW version, meaning that upgrade to this release can only be done from FW version 1.97.1 or newer. If your device is currently running a FW version prior to 1.97.1 you need to upgrade to 1.97.1 or 9.80.2.2, and then apply the latest firmware. NOTE 2: A factory default is now mandatory when trying to downgrade the device. Upgrade the firmware according to the instructions given at https://www.axis.com/support/firmware or howtoupgrade.txt, which is included in the firmware folder. New features in 10.4.0.1 =========================================================================== 10.4.0.1:F1 Default Mapping of sources Devices that are not configured as intermediary device for a Vapix Audio, Vapix Media Clip or SIP in AAM Edge, will by default play incoming audio on the device itself. Default mapping of sources will not be enabled by default if upgrading from a previous Edge version, but can be enabled manually in system settings. 10.4.0.1:F2 Echo cancellation in device configuration web With this fetaure it is possible to toggle echo canccellation on/off in the device configuration web. Echo cancelletion enables microphone gating to avoid echo/feedback loops in half-duplex mode. 10.4.0.1:F3 2 way audio This enables you to setup a half-duplex call to the device. While sound is playing the microphone will be muted to prevent an echo of the speakers voice. To enalbe it you need to enable Echo Cancellation in HW2. You should also turn on full-duplex (to be able to get sound from the microphone, and adjust input gain according to your needs. AAM Edge automatically configure this for you if you use the device as a paging SIP/VAPIX Intercom source. 10.4.0.1:F4 Latency and sound profiles The sould calibration app no offer the ability to set your desired sound and latency profiles. It support both default configuration for the site as well as detailed control for specific sources. 10.4.0.1:F5 OAK retrieval in device configuration web Added the possibility to retrieve the device Owner Authentication Key (OAK) in the device web interface. Note that this functionality requires that the product have direct access to the internet. 10.4.0.1:F6 A factory default is now mandatory when trying to downgrade the device. See How to downgrade at https://www.axis.com/support/firmware for more information. 10.4.0.1:F7 AXIS Audio Manager Edge now support the Safari browser. 10.4.0.1:F8 New languages Japanese, Korean, Russian, Traditional Chinese and Simplified Chinese are added to the list of supported languages [English, French, Italian, Spanish, German, Dutch, Polish, Portuguese (Brazilian)] 10.4.0.1:F9 Updated Apache to version 2.4.46 10.4.0.1:F10 Updated OpenSSL to version 1.1.1i Known Bugs/Limitations =========================================================================== 10.4.0.1:L1 If the user tries to add more than 40 devices at the same time the system might fail to add all devices. The user can still try again and add the remaining devices in one or more sessions. 10.4.0.1:L2 The system will NOT automatically convert the configuration of audio content or schedules from an existing AXIS Audio Player to the new AXIS Audio Manager Edge. This must be done manually. The AXIS Audio Player is still available in this release and it can be used as normal until the user is ready to perform a manual migration of content and schedules. 10.4.0.1:L3 After the introduction of AXIS Audio Manager Edge, the "System Overview" and "System Settings" options in the device configuration menu may be hidden. If you wish to enable these menu options, please start the AXIS Audio Player ACAP (found under the menu option "Services"). Then open the AXIS Audio Player and use the application (e.g. open the volume slider in the lower right corner and adjust the volume) Go back to the device configuration menu and refresh the browser page. The "System Overview" and the "System Settings" options should now be available. Please note that if you wish to stay with the previous audio system or wish to continue using the Audio relay service API we strongly advise you to use the long term support (LTS) software track. (FW version 9.80.2.2) 10.4.0.1:L4 No support for running AAM Edge in Internet Explorer. 10.4.0.1:L5 It is currently not possible to create schedules across midnight. Schedules can be created from 00:00 to 23:59, but it is not possible to create a schedule from e.g. 21:00 to 03:00 the following day. This use case will have to be schedule with two entries. One entry from 21:00 to 23:59 and a second entry from 00:00 to 03:00 the following day. 10.4.0.1:L6 Uninstalled ACAPs will still show up in the list of available ACAPs when creating an ACAP music source. 10.4.0.1:L7 User cannot supply passphrase for encrypted SD cards in the device configuration application after factory default has been performed. 10.4.0.1:L8 To use the 10.4.x firmware together with Axis Audio Manager Pro you must update Axis Audio Manager Pro to version 3.3.1.3.33 or higher. 10.4.0.1:L9 When using MS Edge pre-chromium the user is unable to login after setting a password in HW2.