FIRMWARE RELEASE NOTE ===================== Products affected: AXIS A8004-VE Release date: 2017-11-22 Release type: Production Firmware version: 1.65.1.1 File name: A8004_1_65_1_1.bin Preceding release: 1.65.1 -------------------------------------------------------------------------------- Upgrade instructions ==================== Upgrade the firmware with AXIS Camera Management, HTTP, or FTP. Follow the instructions given in the User Manual, at http://www.axis.com/support/tecnical-notes/how-to-upgrade, or howtoupgrade.txt, which is included in the firmware folder. Corrections in 1.65.1.1 since 1.65.1 ================================= 1.65.1.1:C01 Corrected critical vulnerability ACV-120444 1.65.1.1:C02 Corrected security vulnerability CVE-2016-2147 & CVE-2016-2148 1.65.1.1:C03 Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security level. Known Bugs/Limitations ====================== 1.65.1:L1 When using mp3 files with other samplerates than the native 16kHz performance might suffer and delays be introduced. 1.65.1:L2 As action rules holds copies of recipient information independentally of the Recipient configuration, it is possible to call a SIP recipient using an action rule despite the recipient is removed in the Recipent configuration. To prevent this, one must remove the recipient from the action rule too. 1.65.1:L3 It is not possible to send both RFC2388 and RFC2976 DTMFs through Asterisk at the same time. This limitation can be avoided by using one of RFC 2388 or RFC 2976. It can also be avoided by using Asterisk to transcode into RFC 2976. 1.65.1:L4 Denied access does not show in access log (System Options>Support>Logs and Reports>Access Log) 1.65.1:L5 When the device is facing up or down, tilt tampering detection fuctionality does not work optimally and may generate to events oftern even though the device is not moved or tilted. (The gravity does not effect the two axis normally used for the tilt detection making it sensitive to noise) 1.65.1:L6 TerminateCall feature does not work well with AMC. When AMC is used, the connection lost retry functionality will reconnect the AMC client within seconds of the call being terminated. This results in a new incoming VMS call being setup. Hence, it is not possible to use TerminateCall for VMS Calls in AMC. Supported AXIS VAPIX API Image Resolutions for AXIS A8004-VE ============================================================ Resolution Exceptions ========== ========== 1280x960 1280x720 1024x768 1024x640 800x600 800x500 800x450 640x480 640x400 640x360 480x360 480x300 480x270 320x240 320x200 320x180 240x180 176x144 160x120 160x100 160x90 1400x1050 1) 768x576 1) 720x576 1) 704x576 1) 704x480 1) 704x288 1) 704x240 1) 384x288 1) 352x288 1) 352x240 1) 240x135 1) 192x144 1) 176x120 1) 80x50 1) 1) Not visible in web user interface