FIRMWARE RELEASE NOTE
=====================

Products affected:        AXIS A1601

Release date:             2018-10-31

Release type:             Production

Firmware version:         1.83.1.1

Previous Release:         1.83.1

ONVIF Support:            Profile C, Profile A

--------------------------------------------------------------------------------

Upgrade instructions
====================

Upgrade the firmware according to the instructions given at
https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade
or howtoupgrade.txt, which is included in the firmware folder.


Corrections since 1.83.1
================================================================================
1.83.1.1:C1
Supervised input with a REX configured as Active low is now supported.

1.83.1.1:C2
Supervised input with a Wiegand reader tamper wire is now supported.


Known Bugs/Limitations
================================================================================

1.83.1.1:L1
If upgrading from 1.83.0 to later firmware, IO settings done on port 5 and port 6 are
not migrated to port 13 and port 14 (which are the new names for these physical
ports in 1.83.1). We strongly recommend upgrading with factory default going
from 1.83.0(Initial Production FW only) to any later FW.