FIRMWARE RELEASE NOTE
========================

Products affected:        AXIS A1601

Release date:             2021-03-16

Release type:             Production

Firmware version:         10.4.0.1

Firmware track:           Secure Entry

Preceding release:        10.1.0.1

--------------------------------------------------------------------------------

Upgrade recommendations
========================

When updating the device from the A1601 Active track, it is important to
factory default the device together with the firmware upgrade due to fundamental
arcitectural differences in the access control engine.

Upgrade the firmware according to the instructions given in howtoupgrade.txt,
which is included in the firmware folder or according to instructions at
https://www.axis.com/support/firmware.


NOTE
========================

For latest information about Axis Cybersecurity, see:
https://www.axis.com/support/product-security


New features in 10.4.0.1
================================================================================

10.4.0.1:F1
Preparation for coming access control features in AXIS Camera Station.

10.4.0.1:F2
Added UL component version in param.cgi.

10.4.0.1:F3
Server report improvements for troubleshooting.


Corrections in 10.4.0.1
================================================================================

10.4.0.1:C1
Action rule trigger on "Door Locked" after "Access request" removed.

10.4.0.1:C2
Setting the time from AXIS Camera Station now updates the device web interface
correctly.


Limitations in 10.4.0.1
================================================================================

10.4.0.1:L1
If a credential with access is swiped on a door in scheduled unlock, an
erroneous "Access not taken"-event will be sent for the last credential swiped
with access before the end of the unlocking schedule.

10.4.0.1:L2
"Pre-alarm warning" is a selectable filter for Action rules in AXIS Camera Station,
even though the trigger will never happen.