FIRMWARE RELEASE NOTE
========================

Products affected:        AXIS A1601

Release date:             2020-12-03

Release type:             Production

Firmware version:         10.1.0.1

Firmware track:           Secure entry

Preceding release:        N/A

--------------------------------------------------------------------------------

Upgrade recommendations
========================

When updating the device from the A1601 Active track, it is important to
factory default the device together with the firmware upgrade due to fundamental
arcitectural differences in the access control engine.

Upgrade the firmware according to the instructions given in howtoupgrade.txt,
which is included in the firmware folder or according to instructions at
https://www.axis.com/support/firmware.


NOTE
========================

For latest information about Axis Cybersecurity, see:
https://www.axis.com/support/product-security


New features in 10.1.0.1
================================================================================

10.1.0:F1
First release of firmware on the Secure entry firmware track for compatibility
with AXIS Camera Station. Note that this firmware only works with AXIS Camera
Station and not partner solutions.

Limitations in 10.1.0.1
================================================================================

10.1.0.1:L1
If using action rules in AXIS Camera Staion to trigger on "Door held" in one of
the beta releases of AXIS Camera Station Secure Entry, this rule needs to be
reconfigured as the trigger name has changed to "Door open too long".

10.1.0.1:L2
Action rule in AXIS Camera Station with triggger on "Door Locked" after "Access
request" doesn't work.

10.1.0.1:L3
If a credential with access is swiped on a door in scheduled unlock, an
erronious "Access not taken"-event will be sent for the last credential swiped
with access before the end of the unlocking schedule.

10.1.0.1:L4
"Pre-alarm warning" is a selectable filter for Action rules in AXIS Camera Station,
even though the trigger will never happen.

10.1.0.1:L5
Setting the time from AXIS Camera Station doesn't update the device web interface.
but the time in the firmware is still set correctly.