FIRMWARE RELEASE NOTE
=====================

Products affected:        AXIS A1001

Release date:             2020-02-25

Release type:             Production

Firmware version:         1.65.4

Preceding release:        1.65.3

ONVIF Profiles:           Profile A, Profile C
--------------------------------------------------------------------------------

Upgrade instructions
====================

Upgrade the firmware according to the instructions given at
https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade 
or howtoupgrade.txt, which is included in the firmware folder.

If in an A1001 controller cluster make sure to upgrade all controllers. 
Either all at a time using ADM or straight after each other using web interface 
or FTP. The entire cluster always needs to be on the same Firmware.

If you encounter any issues when upgrading firmware - Contact  Axis tech support.
Never Downgrade/roll back your firmware without a full factory default of your
product.


New features in 1.65.4
======================

1.65.4:F1
Support to edit input debounce time for door monitor.

Corrections in 1.65.4
=====================

1.65.4:C1
Remove error code for deleting a batch of credentials with invalid token.

1.65.4:C2
Pullpoint event time stamp improvement to millisecond level.

1.65.4:C3
Corrected an issue that prevented the device from resolving DNS host names when 
used in combination with SNMP.

Known Bugs/Limitations
======================

1.65.4:L1
When in a controller cluster It is not possible to have an action rule with
additional conditions or working on any other schedule than Always(no schedule)
Nor is it possible to trigger on events originating from another controller in
the cluster.

1.65.4:L2
If you have offline controllers in a controller cluster and try to remove one of
the units that is online this requires a majority of all controllers being
online excluding the controller being removed.

1.65.4:L3
Pressing 'save' on Date & Time page in Axis Entry Manager doesn't update the
ticking clock on the page even though time is set. Refresh the page to see the
current set time.

1.65.4:L4
After a firmware update, the web browser cache may need to be cleared to avoid
seeing pages originating from the old firmware.

1.65.4:L5
During start up of the device the web server is reachable before other sub-
systems are operational, possibly resulting in AEM showing 'Failed to retrieve
device info' on its overview page if accessed during this time. Reloading the
page a few seconds later will resolve this issue.

1.65.4:L6
There are some issues with using a newer version of the SmartIntego Tool to 
generate an importable csv file. The newer version includes the SmartHandle AX 
and it has an equipment string with a different format than the standard smart 
handles. This means that it will be rejected as an unsupported device. To fix this 
and have the SmartHandle AX be registered as traditional Smart Handles, do a 
search and replace in the csv file, replacing 'SI-S2.E0.01.AA.1.S08.M.WO' with  
'SI.SHAS09A722CC1A'.