FIRMWARE RELEASE NOTE ===================== Products affected: AXIS A1001 Release date: 2018-03-19 Release type: Production Firmware version: 1.65.0 File name: A1001_1_65_0.bin Preceding release: 1.60.0.1 Onvif support: Profile C, Profile A -------------------------------------------------------------------------------- Upgrade instructions ==================== Upgrade the firmware according to the instructions given at https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade or howtoupgrade.txt, which is included in the firmware folder. If in an A1001 controller cluster make sure to upgrade all controllers. Either all at a time using ADM or straight after each other using web interface or FTP. The entire cluster always needs to be on the same Firmware! If you encounter any issues when upgrading firmware - Contact Axis tech support. Never Downgrade/roll back your firmware without a full factory default of your product! New features in 1.65.0 ====================== 1.65.0:F1 Added support for Simons Voss SmartIntego locks to have a Whitelist configured in case of communication drop off to the host door controller. Added checkbox in group configuration in Access Management to make a group a Whitelist group with 24/7/365 access. This requires only SmartIntego doors in the group, no schedules will apply and user needs cardRAW credential to be added to the whitelist. Added new property event that is published when a syncronization of whitelisted credentials to a lock is ongoing or not. Added new event for preauthorization when a whitelist access is performed. 1.65.0:F2 Improved page for Manage Network Door Controllers in System. Added upgrade state of individual controllers and firmware numbers as well as an upgrade button with deep link to the upgrade page of the controllers needing an upgrade. 1.65.0:F4 Added the possibility to hide configuration possibilities in Entry manager. This is to stop unknowing misstakes and it is NOT a security feature since there are ways to go around this if you want to. resetting URL is available in the User manual. 1.65.0:F6 We now support importing the door monitor settings from SmartIntego systems through the .csv-file. (SmartIntego Tool version 2.1.6452.23485 required.) 1.65.0:F7 Prepared to be compatible with new SmartIntego error codes in upcoming SmartIntego gateway node fw release 40.08.00 Corrections in 1.65.0 ===================== 1.65.0:C2 Reader Feedback testing, under Hardware connection verification, when having a Wiegand reader configured is no longer missing from web GUI. 1.65.0:C4 Using HID Mobile Access integration, newly produced part numbers that contains an underscore in partnumber id-field will now work as soon as the reply from the HID servers to the controllers are corrected. 1.65.0:C6 In Entry Manager Date & Time Settings you can now input the IP address or the DNS name of an NTP server. Known Bugs/Limitations ====================== 1.65.0:L2 When in a controller cluster It is not possible to have an action rule with additional conditions or working on any other schedule than Always(no schedule) Nor is it possible to trigger on events originating from another controller in the cluster. 1.65.0:L3 If you have offline controllers in a controller cluster and try to remove one of the units that is online this requires a majority of all controllers being online excluding the controller being removed. 1.65.0:L6 Pressing 'save' on Date & Time page in Axis Entry Manager doesn't update the ticking clock on the page even though time is set. Refresh the page to see the current set time. 1.65.0:L12 After a firmware update, the web browser cache may need to be cleared to avoid seeing pages originating from the old firmware. 1.65.0:L19 During start up of the device the web server is reachable before other sub- systems are operational, possibly resulting in AEM showing 'Failed to retrieve device info' on its overview page if accessed during this time. Reloading the page a few seconds later will resolve this issue.