FIRMWARE RELEASE NOTE ===================== Products affected: AXIS T8504-R PoE+ Network Switch Release date: 2020-04-21 Release type: Production Firmware version: 7.10.2518 File name: T8504-R7_10_2518.bin Preceding release: 6.54.2739 -------------------------------------------------------------------------------- Upgrade instructions ===================== Upgrade the firmware with AXIS Camera Management or HTTP. Follow the instructions given in howtoupgrade.txt, which is included in the firmware folder. New Features ======================= 7.10.2518:F1 Add third party software licenses link in the help. 7.10.2518:F2 Support for Security Management via AXIS Device Manager. 7.10.2518:F3 Support for User Management via AXIS Device Manager. 7.10.2518:F4 Support for Date & Time Management via AXIS Device Manager. 7.10.2518:F5 Added VAPIX services, SetWebServerTlsConfiguration, GetWebServerTlsConfiguration 7.10.2518:F6 Added DI/DO option on Web UI. 7.10.2518:F7 Modify PoE Mode default value, only for IPGS-2608AUPort PoE configuration at factory default from 2-pair mode change to Enabled mode. 7.10.2518:F8 Modify PoE Management Mode defaultvalue, only for IPGS-2608AU PoE management mode setting - from PoE management mode class-reserved-power change to poe management mode lldp-reserved-power. 7.10.2518:F9 Modify first time wizard DHCP server default: disabled. 7.10.2518:F10 Add back Rapid Ring on Web UI 7.10.2518:F11 Added Click Save Button when Save Start Button on Web UI. 7.10.2518:F12 Added snmp-server host test trapmode disable 7.10.2518:F13 Added snmp-server host test trapmode tcp 7.10.2518:F14 Added snmp-server host test trapmode udp Known Bugs/Limitations ====================== 7.10.2518:L1 Limitation - Cable Diagnostics is only accurate for cables of length 7 - 140 meters. 7.10.2518:L2 Limitation - Using a Grandstream GX3240 Video IP phone in combination with Reserved Power Determined by: LLDP-Med and Power Managment Mode: Reserved power results in the device rebooting. Corrections ===================== 7.10.2518 Fixed - Topology view: Using "Switch" type to filter topology view, if there is a non-support DMS switch between them, the topology view can't show correctly. 7.10.2518 Fixed - Possible to access topology view with too low privilege level by blocking error message URL. 7.10.2518 Fixed - Traffic Monitor broken. 7.10.2518 Fixed - To import a new running-config into switch, Switch will re-generate the SSH key after reboot. 7.10.2518 Fixed - Execute reload warm function, after reboot will shows "VLAN ID 10 is not existed. Please create it and set its IP. % 2 problems found during configuration. " 7.10.2518 Fixed - Upgrade: after upgrade failed, the syslog/trap/log has no information. 7.10.2518 Fixed - Bug in SSDP response. 7.10.2518 Fixed - Missing Certificate ID in GetWebServerTlsConfigurationResponse. 7.10.2518 Fixed - Ping6 information in Diagnostics Help. 7.10.2518 Fixed - Wrong font in help pages because of missing body class. 7.10.2518 Fixed - MAC based VLAN function doesn't work. 7.10.2518 Fixed - The activation of the default configuration is not customer's default configuration, it will show ruby's model name and change username/password for login. 7.10.2518 Fixed - SCP function doesn't work after inputting wrong file name 5 times. 7.10.2518 Fixed - Modify ACE ARP Parameters "IP" and "Ethernet" descriptin in HELP and CLI command. 7.10.2518 Fixed - Port security : PortSecPortStatusTable OIDs is not working. 7.10.2518 Fixed - Can't change UDLD message interval. 7.10.2518 Fixed - SSH: Enable SSH and login via SSH on Linux platform, and then reload default, the linux’s connection will not be disconnected. 7.10.2518 Fixed - Switch cannot issue DHCP IP other than VLAN 1. 7.10.2518 Fixed - first wizard: After firmware upgrade, the user is forced to redo the first time wizard next time they log on to the switch. 7.10.2518 Fixed - Wrong Bonjour name 7.10.2518 Fixed - QosPortEgressTagRemarkingMapEntry OIDs is not working. 7.10.2518 Fixed - QoS WRR : get a wrong WRR percent via SNMP. 7.10.2518 Fixed - Some PINGs have 0ms answer time value. 7.10.2518 Fixed - Lack of SCP-Fail/SCP-Success prompt on CLI. 7.10.2518 Fixed - Can't erase configuration about SNMPv3 community entry. 7.10.2518 Fixed - System is rebooted , when input port-security maximum, then input any port-security related command. 7.10.2518 Fixed - when Link partner has many sets of IP interfaces information, switch LLDP Neighbor does not display the same. 7.10.2518 Fixed - Web: Trap Event Severity displays "Battery-Power" group name 7.10.2518 Fixed - Web HTTPS certificate is regenerated after firmware upgrade 7.10.2518 Fixed - Web: After entering the First time wizard without setting a password and closing the browser, connecting again will directly enter the system information. 7.10.2518 Fixed - Web: The Start from ID field cannot enter more than 3 digits number in system log information page. 7.10.2518 Fixed - Web: DMS -> Traffic Monitor page does not has help feature. 7.10.2518 Fixed - Web: Execute reload default and keep IP, then the switch unable to get DHCP IP. 7.10.2518 Fixed - PoE schedule can't use when the end time is cross-day and need to start at the same day. 7.10.2518 Fixed - PoE: Mode can not be Enabled. 7.10.2518 Fixed - PoE: Primary Power Supply can not be changed by TLV-config. 7.10.2518 Fixed - PoE: PoE management page help show unnecessary description. 7.10.2518 Fixed - PoE force mode : Port stauts shows "PoE turned ON", but no PD is connected on this port. 7.10.2518 Fixed - PoeChipsetRebootMode does not set via SNMP. 7.10.2518 Fixed - send no snmp-server community v3 public, web still retains the entry. 7.10.2518 Fixed - SNMP: AC/DC both power on, and DC power off will receive "DC1 Power Down" 7.10.2518 Fixed - SNMP: Web UI -> Trap Event Severity Configuration show AC-Power, but CLI does not display. 7.10.2518 Fixed - SNMP: SNMPc can¡¦t polling via SNMPv3, but v7.10.1721 can polling 7.10.2518 Fixed - SNMP: Using SNMPc will result in a reduction in free memory. 7.10.2518 Fixed - SNMP: Switch cannot send SNMP v3 trap. 7.10.2518 Fixed - CLI: unable use ¡§show running-config feature dms server¡¨ to display information. 7.10.2518 Fixed - CLI: There are extra instruction on PoE command. 7.10.2518 Fixed - CLI: redundant "show dhcp" command executable. 7.10.2518 Fixed - ACL : CLI command description is wrong for the "RARP Target MAC Match" parameter. 7.10.2518 Fixed - CLI config mode, when send "no hostname" command, the host name displays RubyTech model name. 7.10.2518 Fixed - CLI: Web UI does not display firmware version on Firmware swap function page. 7.10.2518 Fixed - CLI: After executing "no switchport mode" command on a port, the port will be removed from all VLAN group.