FIRMWARE RELEASE NOTE
======================

Products affected: AXIS Q8685-E

Release date:      2022-10-10

Release type:      Production

Firmware version:  8.40.4.7

Preceding release: 8.40.4.6

--------------------------------------------------------------------------------

This is the LTS-2018 track.

Upgrade instructions
====================

Upgrade the firmware according to the instructions given at
https://www.axis.com/ca/en/support/technical-notes/how-to-upgrade 
or howtoupgrade.txt, which is included in the firmware folder.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.40.4.7 since 8.40.4.6
=======================================

8.40.4.7:C01
General improvements to the LTS-2018 platform.

8.40.4.7:C02
Updated OpenSSL to version 1.1.1q to increase the overall cybersecurity

8.40.4.7:C03
Updated curl to version 7.85.0 to increase overall cybersecurity level.


Corrections in 8.40.4.6 since 8.40.4.5
=======================================

8.40.4.6:C01
General improvements to the LTS-2018 platform.

8.40.4.6:C02
Corrected an issue where 802.1X would not trust the intermediate certificate authority
(CA).

8.40.4.6:C03
Updated cURL to version 7.83.1 to increase the overall cybersecurity level.

8.40.4.6:C04
Upgraded Apache to version 2.4.54 to increase overall cybersecurity level.

8.40.4.6:C05
Corrected an issue where the time tooltip was not displaying correct date after passing
midnight. Also the date in the recordings list and the export was sometimes 1 day off.

8.40.4.6:C06
Corrected an issue that caused timeout while reading boot block parameters.

8.40.4.6:C07
Updated OpenSSL to version 1.1.1p to increase the overall cybersecurity level.


Corrections in 8.40.4.5 since 8.40.4.4
=======================================

8.40.4.5:C01
General improvements to the LTS-2018 platform.

8.40.4.5:C02
Corrected CVE-2018-25032.

8.40.4.5:C03
Improved memory management in the network services daemon.

8.40.4.5:C04
Updated OpenSSL to version 1.1.1o to increase the overall cybersecurity level.

8.40.4.5:C05
Corrected an issue that caused the Send images event to stop uploading towards a FTP
server when the filename included a space (" ").

8.40.4.5:C06
Updated wpa-supplicant to version 2.10 to increase overall minimum cybersecurity level.

8.40.4.5:C07
Receiving ICMP redirects from other network hosts are now disabled to increase overall
minimum cybersecurity level.

8.40.4.5:C08
Upgraded Apache to version 2.4.53 to increase overall cybersecurity level.


Corrections in 8.40.4.4 since 8.40.4.3
=======================================

8.40.4.4:C01
General improvements to the LTS-2018 platform.

8.40.4.4:C02
Corrected an issue that prevented firmware upgrade from LTS-2016.

8.40.4.4:C03
Updated OpenSSL to version 1.1.1m to increase the overall cybersecurity level.

8.40.4.4:C04
Improved handling of empty recordings.

8.40.4.4:C05
Upgraded Curl to version 7.79.1 to increase overall cybersecurity level.

8.40.4.4:C06
Upgraded Apache to version 2.4.52 to increase overall cybersecurity level.

8.40.4.4:C07
The Remote Syslog configuration is now preserved during a firmware update within the same
firmware track.


Corrections in 8.40.4.3 since 8.40.4.2
=======================================

8.40.4.3:C01
General improvements to the LTS-2018 platform.

8.40.4.3:C02
Corrected an issue that did not account for MTU packet fragmentation for IEEE 802.1x
authentication. Previously the Axis device was not able to authenticate properly against
an 802.1x network when the MTU was configured to 1410 or lower.

8.40.4.3:C03
Corrected CVE-2021-27219.

8.40.4.3:C04
Corrected CVE-2021-31987.

8.40.4.3:C05
Corrected CVE-2021-27218.

8.40.4.3:C06
Corrected CVE-2019-12450.

8.40.4.3:C07
Corrected an issue that in combination with some VMSes and low resolution could cause
brief disconnections in the video stream.

8.40.4.3:C08
Corrected an issue that interrupted the NTP-time-sync between the Axis device and NTP-
server when the NTP-server was operating instable and suffered fluctuating time-changes.

8.40.4.3:C09
Corrected an issue that could cause an RTSP stream to stop after 60+ seconds if streamed
to an openRTSP client.

8.40.4.3:C10
Updated Apache to version 2.4.48 to increase overall cybersecurity level.

8.40.4.3:C11
Updated OpenSSH to version 8.6p1 to increase the overall minimum cybersecurity level.

8.40.4.3:C12
Updated OpenSSL to version 1.1.1l to increase overall cyber security level.

8.40.4.3:C13
Corrected CVE-2021-31986.

8.40.4.3:C14
Corrected nice names for the PreventDoSAttack parameters in Settings -> System -> Plain
Config-> System -> PreventDoSAttack.

8.40.4.3:C15
Extended the 802.1x EAP-Identity field character limit from 32 to 128 characters.

8.40.4.3:C16
Corrected an issue that caused images to be unusually dark when using WDR mode.

8.40.4.3:C17
Improved memory management in the DHCP lease update daemon.

8.40.4.3:C18
Corrected an issue that prevented streaming in "always-multicast mode" on rare occasions.

8.40.4.3:C19
Corrected CVE-2021-31988.

8.40.4.3:C20
Corrected an issue that prevented the Axis device to respond with "HTTP 403 Forbidden"
when the source-ip address was blocked when using PreventDOSAttack in Plain Config ->
System. Previously "HTTP 401 Unauthorized" was returned.

8.40.4.3:C21
Improved memory management in the network services daemon.

8.40.4.3:C22
Updated curl to version 7.78.0 to increase overall cybersecurity level.


Corrections in 8.40.4.2 since 8.40.4.1
=======================================

8.40.4.2:C01
General improvements to the LTS-2018 platform.

8.40.4.2:C02
Corrected an issue that caused IEEE 802.1x network authentication to fail sometimes after
unexpected reboots.

8.40.4.2:C03
Improved Link Layer Discovery Protocol (LLDP) system stability.

8.40.4.2:C04
Corrected an issue that caused the value of Quality of Service (QoS) to not be respected
in always multicast mode.

8.40.4.2:C05
Updated curl to version 7.73.0 to increase overall cybersecurity level.

8.40.4.2:C06
Corrected an issue that caused PKCS#12-formatted certificate uploads to fail when certain
special characters were used as a password.

8.40.4.2:C07
Corrected an issue in oak.cgi that could cause invalid requests.

8.40.4.2:C08
Updated OpenSSL to version 1.1.1k to fix CVE-2021-3449 and CVE-2021-3450.

8.40.4.2:C09
Added support for health monitoring using Axis Micron SD card.


Corrections in 8.40.4.1 since 8.40.4
=====================================

8.40.4.1:C01
General improvements to the LTS-2018 platform.

8.40.4.1:C02
Reduced time to built-up an RTSP video stream by 30% and more.

8.40.4.1:C03
Added support for HTTP Strict Transport Security (HSTS) when using HTTPS.

8.40.4.1:C04
Updated Apache to version 2.4.46 to increase overall cyber security level.

8.40.4.1:C05
Corrected an issue that caused an error message to pop-up when pressing the test button of
an event using HTTP recipients.


Corrections in 8.40.4 since 8.40.3.3
=====================================

8.40.4:C01
General improvements to the LTS 2018 platform.

8.40.4:C02

Corrected an issue that caused the camera to lose focus after 24h uptime.

8.40.4:C03
Corrected an issue that caused old recordings to not be removed after their retention
period was expired.

8.40.4:C04
Updated curl to version 7.69.1 to increase overall cybersecurity level.

8.40.4:C05
Added possibility to retrieve the device Owner Authentication Key (OAK) in the web GUI.
Note that this functionality requires that the product have direct access to the internet.

8.40.4:C06
Updated OpenSSL to version 1.1.1g to increase overall cybersecurity level.

8.40.4:C07
Updated Apache to version 2.4.43 to increase overall cybersecurity level.


Corrections in 8.40.3.3 since 8.40.3.2
=======================================

8.40.3.3:C01
General improvements to the 2018 LTS platform.

8.40.3.3:C02
Improved lens correction algorithm.

8.40.3.3:C03
Added ProxyDispatcherOnly option to the O3C/AVHS client that can control proxy
configurations of dispatcher services.

8.40.3.3:C04
Corrected an issue that on some occasions could cause an H.264 stream to stall after a
while if viewed in the browser.

8.40.3.3:C05
Corrected ONVIF response for WSPullPointSupport.


Corrections in 8.40.3.2 since 8.40.3.1
=======================================

8.40.3.2:C01
General improvements to the 2018 LTS platform.

8.40.3.2:C02
Corrected Vendor class identifier for DHCP negotiation.

8.40.3.2:C03
Updated curl to version 7.68.0 to increase the minimum cybersecurity level.

8.40.3.2:C04
Corrected an issue that prevented the device from resolving DNS hostnames when used in
combination with SNMP.

8.40.3.2:C05
Added the option to disable Web-Service Discovery (WS-Discovery) protocol in Plain Config.

8.40.3.2:C06
Corrected an issue that caused the test recipient button in the Web GUI to not work
properly when setting up an event mail recipient.

8.40.3.2:C07
Corrected an issue that caused multicast redirection to fail on rare occasions.

8.40.3.2:C08
Updated Linux kernel to version 4.9.197 to increase the minimum cybersecurity level.

8.40.3.2:C09
Corrected an issue that prevented the user from exporting recordings when the product was
configured to Alaska timezone.

8.40.3.2:C10
Corrected an issue that caused the EAP-START package not to be sent during IEEE 802.1x
port authentication upon network link state change.

8.40.3.2:C11
Updated wpa-supplicant to version 2.9 and hostapd to version 2.9 to increase overall
minimum cyber security level.
Corrections for the following security vulnerabilities are
included:
CVE-2019-13377
CVE-2019-16275.

8.40.3.2:C12
Corrected a streaming issue affecting RTSP tunneled via HTTPs.


Corrections in 8.40.3.1 since 8.40.3
=====================================

8.40.3.1:C01
General improvements to the 2018 LTS platform.

8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.

8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.

8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).

8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.

8.40.3.1:C06
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.

8.40.3.1:C07
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.

8.40.3.1:C08
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.

8.40.3.1:C09
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.

8.40.3.1:C10
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.

8.40.3.1:C11
Added white light illumination event action.

8.40.3.1:C12
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.

8.40.3.1:C13
Corrected an issue that caused fan status not to be reported correctly via SNMP.

8.40.3.1:C14
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.

8.40.3.1:C15
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.

8.40.3.1:C16
Added support for health status from Western Digital SD-cards.

8.40.3.1:C17
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.


Corrections in 8.40.3 since 8.40.2.2
=====================================

8.40.3:C01
General minor improvements to the 8.40 LTS platform.

8.40.3:C02
Removed the root users default password in factory defaulted firmware. The password of the
root user must be set first in order to initialize VAPIX and ONVIF interfaces to allow
further configuration. This change only affects products in its factory defaulted state,
products that are already deployed in production systems are not affected by this update
until factory defaulted.

8.40.3:C03
Update libssh2 to version 1.9.0 to increase overall minimum cyber security level. This
update includes correction for CVE-2019-13115.


Corrections in 8.40.2.2 since 8.40.2.1
=======================================

8.40.2.2:C01
General minor improvements to the 8.40 LTS platform.

8.40.2.2:C02
Corrected the following kernel vulnerabilities to increase overall minimum cyber security
level (collectively known as "TCP SACK PANIC"):
CVE-2019-11477, 
CVE-2019-11478,
CVE-2019-11479.

8.40.2.2:C03
Corrected an issue that caused problems accessing devices via O3C/Axis Guardian using
Microsoft Edge browser.

8.40.2.2:C04
Improved the certificate management system: It is now possible to upload PKCS#12
certificates with a total size of 102400 bytes. The previous limit was 1/10 of it.

8.40.2.2:C05
Corrected an issue that caused some users not to be displayed in the webGUI's user list on
rare occasions.

8.40.2.2:C06
Improved the certificate management system: added support for certificate IDs with long
names.

8.40.2.2:C07
Updated openSSL to version 1.1.1c to increase overall minimum cyber security level.

8.40.2.2:C08
Added support for TLSv1.3.

8.40.2.2:C09
Corrected security vulnerability in Systemd CVE-2019-6454 to increase overall minimum
cyber security level.

8.40.2.2:C10
Improved the certificate management system: added system log information for failing
certificate upload.

8.40.2.2:C11
Corrected an issue that caused SMB connection problems to NetApp NAS configured for SMBv2.

8.40.2.2:C12
Updated libssh2 to version 1.8.2 due to that version 1.8.1 broke publickey-userauth
requests.

8.40.2.2:C13
Corrected an issue that caused images to be unusually dark in WDR mode on rare occasions.


Corrections in 8.40.2.1 since 8.40.2
=====================================

8.40.2.1:C01
General minor improvements to the 8.40 LTS platform.

8.40.2.1:C02
Updated Apache to version 2.4.39 to increase overall minimum cyber security level.

8.40.2.1:C03
Improved robustness of the O3C client.

8.40.2.1:C04
Updated OpenSSL to version 1.1.1b to increase overall minimum cyber security level.

8.40.2.1:C05
Updated OpenSSH to version 7.9p to increase overall minimum cyber security level.

8.40.2.1:C06
Added information about Certificate ID to the Installed Certificates section in the server
report.


Corrections in 8.40.2 since 8.40.1.2
=====================================

8.40.2:C01
General minor improvements to the 8.40 LTS platform.

8.40.2:C02
Added OnScreenControl support for wiper.

8.40.2:C03
Corrected the following security vulnerabilities to increase overall minimum cyber
security level: CVE-2019-3855, CVE-2019-3856, CVE-2019-3857, CVE-2019-3858, CVE-2019-3859,
CVE-2019-3860, CVE-2019-3861, CVE-2019-3862, CVE-2019-3863.

8.40.2:C04
Corrected security vulnerability CVE-2019-0217 in Apache to increase overall minimum cyber
security level.

8.40.2:C05
Corrected security vulnerability CVE-2017-16544 in BusyBox to increase overall minimum
cyber security level.

8.40.2:C06
Corrected an issue that caused a viewer user to not be able to obtain the list of image
resolution properties via param.cgi.

8.40.2:C07
Corrected an issue in the Web-GUI that prevented to upload a Client Certificate or CA
certificate using the Edge browser.

8.40.2:C08
Corrected an issue that caused excessive prints of the limits.cgi to the system logs.

8.40.2:C09
Updated pre-installed Mozilla CA-certificates to versions available at 20190122.

8.40.2:C10
Added GOP Length option to the Stream Profile Settings.

8.40.2:C11
Corrected the following vulnerabilities in order to increase overall minimum cybersecurity
level: CVE-2018-16864, CVE-2018-16865, CVE-2018-16866.

8.40.2:C12
Updated OpenSSL to version 1.0.2r to increase overall minimum cyber security level.

8.40.2:C13
Corrected an issue with timestamps in the RTCP Sender Report that could cause RTSP
recordings/playbacks not to work correctly in some video players using the Live555 library
such as VLC and ffmpeg.


Corrections in 8.40.1.2 since 8.40.1.1
=======================================

8.40.1.2:C01
General minor improvements to the 8.40 LTS platform.

8.40.1.2:C02
Corrected an issue in the web GUI when creating a preset position and the language was set
to German.

8.40.1.2:C03
Corrected an issue that could cause the camera to get unresponsive when two clients are
streaming over multicast using the same streaming parameters.

8.40.1.2:C04
Upgraded Apache to version 2.4.38 to increase overall minimum cyber security level.

8.40.1.2:C05
Corrected an issue with Always Multicast over IPv6.

8.40.1.2:C06
Corrected an issue that caused factory default settings to not be applied correctly when
upgrading from a firmware version prior to 6.20.

8.40.1.2:C07
Corrected an issue in the web GUI that caused IO Port values to be displayed incorrectly.

8.40.1.2:C08
Corrected an issue that caused Recorded Guard Tour not to work properly on rare occasions.

8.40.1.2:C09
Improved re-connection behavior to AVHS server. The time between failed connection
attempts will now gradually increase until a hard limit is reached.


New features in 8.40.1.1
================================================================================

8.40.1.1:F1
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk. The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

8.40.1.1:F2
Apache web server has been updated to version 2.4.35.

8.40.1.1:F3
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

8.40.1.1:F4
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

8.40.1.1:F5
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

8.40.1.1:F6
AXIS Motion Guard is now pre-installed.

8.40.1.1:F7
AXIS Fence Guard is now pre-installed.

8.40.1.1:F8
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

8.40.1.1:F9
Support for day / night shift level adjustment.

8.40.1.1:F10
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to improve the user experience.

8.40.1.1:F11
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

8.40.1.1:F12
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

8.40.1.1:F13
Changed the default setting of SRTP to disabled in order to reduce the number of
ports opened by default.

8.40.1.1:F14
AXIS Video Motion Detection 4.2-5 is now pre-installed.

8.40.1.1:F15
Prepared support for signed firmware to increase overall cyber security level.
It is planned that the product will only accept AXIS security-signed firmware
starting in Q1/Q2 2019 and onwards.


Corrections in 8.40.1.1
================================================================================

8.40.1.1:C1
Corrected an issue that caused the camera to stop streaming on rare occasions.

8.40.1.1:C2
Corrected an issue when an ONVIF client connected to the camera via digest
authentication.

8.40.1.1:C3
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

8.40.1.1:C4
Fixed critical vulnerability ACV-116267.

8.40.1.1:C5
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

8.40.1.1:C6
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

8.40.1.1:C7
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

8.40.1.1:C8
Corrected an issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable on some rare occasions.

8.40.1.1:C9
Corrected critical vulnerability ACV-128401.

8.40.1.1:C10
Increased user awareness when converting legacy overlays to dynamic overlays. A
restart of ongoing recordings is required after overlay conversion.

8.40.1.1:C11
Corrected an issue that could cause the configuration file upload from ADM to
camera to fail.

8.40.1.1:C12
Patched security vulnerability CVE-2018-5390 to increase overall minimum cyber
security level.

8.40.1.1:C13
Patched security vulernability CVE-2018-14526 to increase overall minimum cyber
security level.


Known Bugs/Limitations
================================================================================

8.40.3:L1
There might be features currently explained in the help files that may not be
supported by the camera.

8.40.3:L2
Videos recorded using the video capture feature in Live View may not be playable
or might get stuck in some media players. This was seen e.g. with Windows Media
Player.

8.40.3:L3
An overlay text (e.g. date/time modifier) that has been configured in the
classic web-interface will still be shown in the new web-interface even though a
user might have disabled the overlay text there after firmware update. A user
needs to disable the overlay text in the Plain config. Untick the checkboxes for
Image Ix Text -> ClockEnabled and DateEnabled.

8.40.3:L4
IEEE 802.1x configuration does not work in Microsoft Edge.

8.40.3:L5
A user might experience frame drops on rare conditions when video streaming in
Firefox 57 due to specific computer hardware. It is recommended to use Google
Chrome instead.

8.40.3:L6
It is recommended to refresh the browser with F5 after doing a FW upgrade from FW
6.xx to 8.xx or higher in order to show all the new settings in the web-
interface.


Supported AXIS VAPIX API Image Resolutions for AXIS Q8685-E
=================================================================

Resolution  Exceptions
==========  ==========

1920x1080   2)
1280x720
800x450
480x270
320x180

1400x1050   1) 2)
1280x960    1) 2)
1024x768    1) 2)
1024x640    1)
1024x576    1)
800x600     1)
768x576     1)
720x576     1)
704x576     1)
704x480     1)
640x480     1)
640x400     1)
640x360     1)
704x288     1)
480x360     1)
704x240     1)
480x300     1)
384x288     1)
352x288     1)
352x240     1)
320x240     1)
320x200     1)
240x180     1)
192x144     1)
176x144     1)
176x120     1)
160x120     1)
160x100     1)
160x90      1)
80x50       1)
analyze     1)

1) Not visible in web user interface
2) 1080p 1920x1080 (16:9) @ 25/30 fps
Known Bugs/Limitations
================================================================================

8.40.3:L1
There might be features currently explained in the help files that may not be
supported by the camera.

8.40.3:L2
Videos recorded using the video capture feature in Live View may not be playable
or might get stuck in some media players. This was seen e.g. with Windows Media
Player.

8.40.3:L3
An overlay text (e.g. date/time modifier) that has been configured in the
classic web-interface will still be shown in the new web-interface even though a
user might have disabled the overlay text there after firmware update. A user
needs to disable the overlay text in the Plain config. Untick the checkboxes for
Image Ix Text -> ClockEnabled and DateEnabled.

8.40.3:L4
IEEE 802.1x configuration does not work in Microsoft Edge.

8.40.3:L5
A user might experience frame drops on rare conditions when video streaming in
Firefox 57 due to specific computer hardware. It is recommended to use Google
Chrome instead.

8.40.3:L6
It is recommended to refresh the browser with F5 after doing a FW upgrade from FW
6.xx to 8.xx or higher in order to show all the new settings in the web-
interface.


Supported AXIS VAPIX API Image Resolutions for AXIS Q8685-E
=================================================================

Resolution  Exceptions
==========  ==========

1920x1080   2)
1280x720
800x450
480x270
320x180

1400x1050   1) 2)
1280x960    1) 2)
1024x768    1) 2)
1024x640    1)
1024x576    1)
800x600     1)
768x576     1)
720x576     1)
704x576     1)
704x480     1)
640x480     1)
640x400     1)
640x360     1)
704x288     1)
480x360     1)
704x240     1)
480x300     1)
384x288     1)
352x288     1)
352x240     1)
320x240     1)
320x200     1)
240x180     1)
240x135     1)
192x144     1)
176x144     1)
176x120     1)
160x120     1)
160x100     1)
160x90      1)
80x50       1)
analyze     1)

1) Not visible in web user interface
2) 1080p 1920x1080 (16:9) @ 25/30 fps