FIRMWARE RELEASE NOTE ====================== Products affected: Q6075-S / Q6075-SE Release date: 2022-07-13 Release type: Production Firmware version: 9.80.3.13 Preceding release: 9.80.3.12 -------------------------------------------------------------------------------- This is the LTS-2020 track. Upgrade recommendations ======================== If you need to step up your firmware several steps, it is recommended to do an intermediate upgrade to LTS-tracks before proceeding. For example if the current version is 7.40 and you want to upgrade to 9.80. Then you should do the upgrade in these steps: 7.40 => 8.40 LTS => 9.80. Upgrade the firmware according to the instructions given in howtoupgrade.txt, which is included in the firmware folder or at the firmware portal at https://www.axis.com NOTE ======================== For latest information about Axis Cybersecurity, see: https://www.axis.com/support/product-security Corrections in 9.80.3.13 since 9.80.3.12 ========================================= 9.80.3.13:C01 General improvements to the LTS-2020 platform. 9.80.3.13:C02 Corrected an issue where 802.1X would not trust the intermediate certificate authority (CA). 9.80.3.13:C03 Upgraded Apache to version 2.4.54 to increase overall cybersecurity level. 9.80.3.13:C04 Products with Hardware ID 987.1, 987.2, 988.1, 988.2, 989.1, 989.2, 98A.1, 98A.2, 98B.1 and 98B.2 only support active track firmware 10.11.87 and later, as well as LTS track firmware 9.80.3.13 and later. Products with hardware ID 917.1, 917.2, 918.1, 918.2, 914.1, 914.2, 915.1, 915.2, 916.1 and 916.2 support firmware version 10.6.5 and later, and as well as LTS track firmware 9.80.3.4 and later. Products with hardware ID 7D9.1, 7D9.2, 7DA.1, 7DA.2, 7B0, 7B1, 7FA.1 and 7FA.2 support all firmware versions. The hardware ID can be found in Plain config -> Properties -> System -> Hardware ID. More information can be found in https://www.axis.com/support/faq/FAQ116555. 9.80.3.13:C05 ONVIF recordings are now continued automatically after disruptions. 9.80.3.13:C06 Updated OpenSSL to version 1.1.1q to increase the overall cybersecurity level. Corrections in 9.80.3.12 since 9.80.3.11 ========================================= 9.80.3.12:C01 General improvements to the LTS-2020 platform. 9.80.3.12:C02 Corrected CVE-2018-25032. 9.80.3.12:C03 Updated OpenSSL to version 1.1.1o to increase the overall cybersecurity level. Corrections in 9.80.3.11 since 9.80.3.10 ========================================= 9.80.3.11:C01 General improvements to the LTS-2020 platform. 9.80.3.11:C02 Receiving ICMP redirects from other network hosts are now disabled to increase overall minimum cybersecurity level. 9.80.3.11:C03 Corrected CVE-2021-33910. 9.80.3.11:C04 Updated the certificate management API's to handle camera models that do not support Real- Time Streaming Protocol over SSL (RTSPS). 9.80.3.11:C05 Updated OpenSSL to version 1.1.1n to increase the overall minimum cybersecurity level. 9.80.3.11:C06 Corrected CVE-2021-29462. 9.80.3.11:C07 Updated wpa-supplicant to version 2.10 to increase overall minimum cybersecurity level. 9.80.3.11:C08 Improved memory management in the network services daemon. 9.80.3.11:C09 Upgraded Apache to version 2.4.53 to increase overall cybersecurity level. Corrections in 9.80.3.10 since 9.80.3.8 ======================================== 9.80.3.10:C01 General improvements to the LTS-2020 platform. 9.80.3.10:C02 Upgraded Apache to version 2.4.52 to increase overall cybersecurity level. 9.80.3.10:C03 Improved handling of empty recordings. 9.80.3.10:C04 Corrected an issue that caused the Send images event to stop uploading towards a FTP server when the filename included a space (" "). 9.80.3.10:C05 Corrected CVE-2020-13848. 9.80.3.10:C06 Updated OpenSSL to version 1.1.1m to increase the overall cybersecurity level. Corrections in 9.80.3.8 since 9.80.3.7 ======================================= 9.80.3.8:C01 General improvements to the LTS-2020 platform. Corrections in 9.80.3.7 since 9.80.3.5 ======================================= 9.80.3.7:C01 General improvements to the LTS-2020 platform. 9.80.3.7:C02 Improved system stability of the Network Services. 9.80.3.7:C03 Upgraded Apache to version 2.4.51 to increase overall cybersecurity level. 9.80.3.7:C04 Corrected an issue that could cause 'transmit.cgi' to close connection prematurely when transmitting audio to the camera. 9.80.3.7:C05 Improved response time of the I/O port monitoring cgi "/axis-cgi/io/input.cgi?monitor=1". 9.80.3.7:C06 Updated OpenSSL to version 1.1.1l to increase overall cybersecurity level. 9.80.3.7:C07 Updated curl to version 7.79.1 to increase overall cybersecurity level. 9.80.3.7:C08 Updated the header for H.265 streams to not include delay information in order to avoid that some video clients may mistake it for B-frames. 9.80.3.7:C09 The Remote Syslog configuration is now preserved during a firmware update within the same firmware track. 9.80.3.7:C10 Corrected an issue that caused Overlay text flickers when used in conjunction with an event triggered by Recording ongoing condition. 9.80.3.7:C11 Corrected an issue that caused active recordings to be restarted when adding a new recording rule. Corrections in 9.80.3.5 since 9.80.3.3 ======================================= 9.80.3.5:C01 General improvements to the LTS-2020 platform. 9.80.3.5:C02 Corrected an issue that interrupted the NTP-time-sync between the Axis device and NTP- server when the NTP-server was operating instable and suffered fluctuating time-changes. 9.80.3.5:C03 Corrected CVE-2021-31987. 9.80.3.5:C04 Corrected CVE-2020-26558. 9.80.3.5:C05 Corrected CVE-2021-31986. 9.80.3.5:C06 Corrected CVE-2021-31988. 9.80.3.5:C07 Updated curl to version 7.78.0 to increase overall cybersecurity level. 9.80.3.5:C08 Updated Apache to version 2.4.48 to increase overall cyber security level. 9.80.3.5:C09 Corrected CVE-2021-27219. 9.80.3.5:C10 Corrected CVE-2021-27218. Corrections in 9.80.3.3 since 9.80.3.2 ======================================= 9.80.3.3:C01 General improvements to the LTS-2020 platform. 9.80.3.3:C02 Corrected an issue that did not account for MTU packet fragmentation for IEEE 802.1x authentication. Previously the Axis device was not able to authenticate properly against an 802.1x network when the MTU was configured to 1410 or lower. 9.80.3.3:C03 Corrected an issue that prevented the device to stream in always-multicast mode after the video stream processing has been restarted. 9.80.3.3:C04 Extended the 802.1x EAP-Identity field character limit from 32 to 128 characters. 9.80.3.3:C05 Increased the number of characters allowed in the name of an Action Event Condition, from 80 to 512. 9.80.3.3:C06 Updated OpenSSH to version 8.6p1 to increase the overall minimum cyber security level. 9.80.3.3:C07 Corrected an issue that caused already established secure connections such as HTTPS or One-Click Cloud Connections to be interrupted. Corrections in 9.80.3.2 since 9.80.3.1 ======================================= 9.80.3.2:C01 General improvements to the LTS-2020 platform. 9.80.3.2:C02 Corrected an issue that on rare occasions caused the image to turn green after a power loss. 9.80.3.2:C03 Added One Shot Auto Focus. To set, go to Settings -> System -> Plain config -> PTZ. Scroll down to UserAdv U1 and tick the check box One shot AF. Scroll down to the end of the page and click the Save button. 9.80.3.2:C04 Corrected an issue that on some occasions could prevent export of a part of a recording. 9.80.3.2:C05 Updated OpenSSL to version 1.1.1k to fix CVE-2021-3449 and CVE-2021-3450. 9.80.3.2:C06 Added an option to manually re-calibrate focus. Please do not re-calibrate until you have read the instructions related to this available here: https://axis.com/files/manuals/Re- calibrationQ6074_6075.pdf 9.80.3.2:C07 Corrected an issue that prevented the Axis device to respond with HTTP 403 Forbidden when the source-ip address was blocked when using PreventDOSAttack in Plain Config -> System. Previously HTTP 401 Unauthorized was returned. 9.80.3.2:C08 Added support for Micron SD Card Health Monitoring. 9.80.3.2:C09 Improved Link Layer Discovery Protocol (LLDP) system stability. 9.80.3.2:C10 Corrected nice names for the PreventDoSAttack parameters in Settings -> System -> Plain Config-> System -> PreventDoSAttack. Corrections in 9.80.3.1 since 9.80.3 ===================================== 9.80.3.1:C01 General improvements to the LTS-2020 platform. 9.80.3.1:C02 Improved Link Layer Discovery Protocol (LLDP) system stability. 9.80.3.1:C03 Updated Curl to version 7.73.0 to increase overall cybersecurity level. 9.80.3.1:C04 Updated OpenSSL to version 1.1.1i to increase overall cyber security level. 9.80.3.1:C05 Improved manual focus adjustment 9.80.3.1:C06 Corrected an issue that caused the MQTT configuration in the device to get corrupt on rare occasions. 9.80.3.1:C07 Improved manual focus behaviour. 9.80.3.1:C08 Corrected an issue that could cause an MQTT event to be duplicated upon registering the same event multiple times. Corrections in 9.80.3 since 9.80.2.4 ===================================== 9.80.3:C01 General improvements to the LTS-2020 platform. 9.80.3:C02 Corrected an issue that sometimes could make it impossible to export the full length of recordings. 9.80.3:C03 Corrected an issue that sometimes prevented adjustment of the focus window. 9.80.3:C04 Corrected an issue in oak.cgi that could cause invalid requests. 9.80.3:C05 Update OpenSSL to version 1.1.1h to increase overall cyber security level. 9.80.3:C06 Corrected an issue that prevented the device to utilize the available network bandwidth in high-latency networks such as 4G cellular network. 9.80.3:C07 Corrected an issue that caused PKCS#12-formatted certificate uploads to fail when certain special characters were used as a password. 9.80.3:C08 Corrected an issue that caused parallel HTTPS CGI requests to fail on rare occasions. 9.80.3:C09 Corrected an issue with pause-frame handling that could cause network disconnections if pause-frames were enabled and used in the network. 9.80.3:C10 Updated IANA Time Zone Database to version 2020d to get the latest Time Zone updates. 9.80.3:C11 Corrected an issue in the Web GUI that caused an error message when using a client certificate with '>' character in it's ID for HTTPS access. 9.80.3:C12 Corrected an issue that caused the value of Quality of Service (QoS) to not be respected in always multicast mode. Corrections in 9.80.2.4 since 9.80.2.3 ======================================= 9.80.2.4:C01 General improvements to the LTS-2020 platform. 9.80.2.4:C02 Corrected an issue that caused the device to stop video streaming over multicast after receiving multiple RTSP PLAY requests with "npt=0.000-" payload. 9.80.2.4:C03 Added support for HTTP Strict Transport Security (HSTS) when using HTTPS. Corrections in 9.80.2.3 since 9.80.2.2 ======================================= 9.80.2.3:C01 General improvements to the LTS-2020 platform. 9.80.2.3:C02 Reduced time to built-up an RTSP video stream by 30% and more. 9.80.2.3:C03 Corrected an issue in FTP Send Image Action Rule that caused disabling of "Use Temporary File" checkbox to be ignored. 9.80.2.3:C04 Reduced time for the web interface to load. 9.80.2.3:C05 Updated Apache to version 2.4.46 to increase overall cyber security level. 9.80.2.3:C06 Corrected an issue that caused incorrect requests to be sent when testing passive mode FTP recipients. 9.80.2.3:C07 Corrected an issue that caused an error message to pop-up when pressing the test button of an event using HTTP recipients. 9.80.2.3:C08 The following HTTP headers are now configured per default to increase overall cybersecurity level: X-Frame-Options: SAMEORIGIN X-Content-Type-Options: nosniff X-XSS-Protection: 1; mode=block. Corrections in 9.80.2 ================================================================================ 9.70.1.5:C1 Improved system stability. Known Bugs/Limitations ================================================================================ 9.70.1:L1 When using a VMD 4 event in combination with a connected preset, a refresh of the VMD 4 configuration page after a camera restart is needed for the event to work. Supported AXIS VAPIX API Image Resolutions for Q6075-S / Q6075-SE ================================================================================ Resolution Exceptions ------------ ------------ 1920x1080 1280x720 800x450 480x270 320x180 1280x960 1) 1024x768 1) 1024x576 1) 800x600 1) 768x576 1) 720x576 1) 704x576 1) 704x480 1) 704x288 1) 704x240 1) 640x480 1) 640x360 1) 480x360 1) 384x288 1) 352x288 1) 352x240 1) 320x240 1) 240x180 1) 192x144 1) 176x144 1) 176x120 1) 160x120 1) 160x90 1) analyze 1) 1) Not visible in web user interface