FIRMWARE RELEASE NOTE ===================== Products affected: Q6074 Release date: 2019-10-29 Release type: Production Firmware version: 9.40.1.3 New product: No previous release -------------------------------------------------------------------------------- Upgrade instructions ==================== Upgrade the firmware according to the instructions given at https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade or howtoupgrade.txt, which is included in the firmware folder. New features in 9.40.1.3 ================================================================================ 9.40.1.3:F1 Added support for H.265 stream profiles to be used in Send Video Clip action rules. 9.40.1.3:F2 Added support for search functionality in help files. 9.40.1.3:F3 Added support for systemready.cgi which will improve re-connection of the browser to the web-interface after e.g. powercyle or restart of the product. 9.40.1.3:F4 Added support for automatic firmware rollback verfication. The user can chose to select this option prior to performing an firmware upgrade. When chosen, the product will perform the upgrade and then wait a pre-defined time for the user to acknowledge the upgrade in the web-interface. If not acknowledged in time, the product will rollback to its previous firmware. 9.40.1.3:F5 Added support for the possibility to configure a secondary NTP server in web- interface under Settings -> System -> Date & Time or via VAPIX Time API. 9.40.1.3:F6 The video stream is now paused by default when accessing the product through the web-interface in order to save network bandwidth. 9.40.1.3:F7 Removed the root users default password in factory defaulted firmware. The password of the root user must be set first in order to initialize VAPIX and ONVIF interfaces to allow further configuration. This change only affects products in its factory defaulted state, products that are already deployed in production systems are not affected by this update until factory defaulted. For more information please see https://www.axis.com/support/faq/FAQ116429. 9.40.1.3:F8 Added support for uploading custom firmware certificates in the web-interface under Settings -> System -> Security in order to allow the Axis product to accept AXIS developer firmware during firmware upgrade. 9.40.1.3:F9 Added support for "Wait at least time x" before re-running a configured action rule. 9.40.1.3:F10 Updated Video Motion Detection to version 4.4.0. 9.40.1.3:F11 Updated Motion Guard to version 2.2.0. 9.40.1.3:F12 Updated Fence Guard to version 2.2.0. 9.40.1.3:F13 Updated Loitering Guard to version 2.2.0 Corrections in 9.40.1.3 ================================================================================ 9.40.1.3:C1 Corrected an issue that could cause false RAM memory initialisation during boot- up on rare occasions. Supported AXIS VAPIX API Image Resolutions for Q6074 ================================================================================ Resolution Exceptions ========== ========== 1280x720 800x450 480x270 320x180 1024x768 1) 1024x576 1) 800x600 1) 768x576 1) 720x576 1) 704x576 1) 704x480 1) 640x480 1) 640x360 1) 704x288 1) 480x360 1) 704x240 1) 384x288 1) 352x288 1) 352x240 1) 320x240 1) 240x180 1) 192x144 1) 176x144 1) 176x120 1) 160x120 1) 160x90 1) analyze 1) 1) Not visible in web user interface