FIRMWARE RELEASE NOTE
======================

Products affected: AXIS Q3708-PVE

Release date:      2020-06-26

Release type:      Production

Firmware version:  6.55.8

Preceding release: 6.55.7.1

--------------------------------------------------------------------------------

Upgrade instructions
====================

Upgrade the firmware according to the instructions given at
https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade 
or howtoupgrade.txt, which is included in the firmware folder.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 6.55.8 since 6.55.7.1
=====================================

6.55.8:C01
General improvements to the 2016 LTS platform.

6.55.8:C02
Corrections for the security vulnerability CVE-2019-16275 in wpa_supplicant/hostapd.

6.55.8:C03
Corrected an issue that prevented video clips to be sent from action rules using HTTPS or
Email recipients.

6.55.8:C04
Corrected an issue that caused the database used to store DHCP adresses to be corrupted
during a power cut.

6.55.8:C05
Added ProxyDispatcherOnly option to the O3C/AVHS client that can control proxy
configurations of dispatcher services.

6.55.8:C06
Updated libcurl to version 7.68 to increase overall cyber security.

6.55.8:C07
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.

6.55.8:C08
Updated OpenSSH to version 7.9p to increase overall cyber security.

6.55.8:C09
Corrected an issue that caused the test recipient button in the Web GUI to not work
properly when setting up an event mail recipient.

6.55.8:C10
Updated OpenSSL to version 1.1.1d to increase overall cyber security.

6.55.8:C11
Added support for resolve domain name trap addresses in SNMP.

6.55.8:C12
Corrected a streaming issue affecting RTSP tunneled via HTTPs.

6.55.8:C13
Updated wpa-supplicant to version 2.9 to increase overall cyber-security.
The following
security vulnerabilites are included:
CVE-2019-13377
CVE-2019-16275.

6.55.8:C14
Corrected an issue that prevented the user to set the time and date manually in the
WebGUI.

6.55.8:C15
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.

6.55.8:C16
Updated time zones in date/time settings in web-GUI.

6.55.8:C17
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.

6.55.8:C18
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.

6.55.8:C19
Correct an issue that could disconnect the camera from network share drive when CIFS (SMB)
2.x or higher is enable.

6.55.8:C20
Corrected an issue that on rare occasions caused the image to go
grey when streaming JPEG.

6.55.8.C21
Corrected an issue where "anonymous viewer" and "viewer" access was not working.

6.55.8.C22
Corrected an issue where including user data made H.264 not being able to be streamed.


Known Bugs/Limitations
================================================================================

6.55.8:L1
WDR Forensic Capture is only possible when the Exposure control setting is set
to Automatic. Any settings done in non WDR Forensic Capture mode will be
invisible when in WDR Forensic Capture mode.


Supported AXIS VAPIX API Image Resolutions for AXIS Q3708-PVE
================================================================================

Resolution  Exceptions
==========  ==========

2560x1920   3)
2560x1440   2)
1920x1080   2)
1600x1200   3)
1280x960    3)
1280x720    2)
1024x768    3)
800x600     3)
800x450     2)
640x480     3)
640x360     2)
480x360     3)
480x270     2)
320x240     3)

768x576     1) 3)
704x576     1)
704x480     1)
384x288     1) 3)
352x240     1)
176x144     1)
176x120     1)
80x60       1)

1) Not visible in web user interface
2) QHD 2560x1440 (16:9)
3) 5 MP 2560x1920 (4:3)