FIRMWARE RELEASE NOTE ====================== Products affected: AXIS Q3708-PVE Release date: 2018-04-05 Release type: Production Firmware version: 5.95.4.7 File name: Q3708-PVE_5_95_4_7.bin Preceding release: 5.95.4.6 -------------------------------------------------------------------------------- Upgrade instructions ==================== The firmware can be upgraded using Axis Camera Management, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. NOTE ==================== For latest information about Axis Cybersecurity, see https://www.axis.com/se/sv/support/product-security. Corrections in 5.95.4.7 since 5.95.4.6 ====================================== 5.95.4.7:C01 Corrected critical vulnerability ACV-128401. 5.95.4.7:C02 Corrected an issue that caused the first sensor to stop streaming on rare occasions. Known Bugs/Limitations ====================== 5.95.4.7:L01 Network Lost event can not be triggered. 5.95.4.7:L02 Password longer than 64 characters is truncated without notifying the user about it. 5.95.4.7:L03 ACAP Cross Line detection v1.1 only works for left channel. This is a limitation in the ACAP. 5.95.4.7:L04 WDR Forensic Capture is only possible when the Exposure control setting is set to Automatic. Any settings done in non WDR Forensic Capture mode will be invisible when in WDR Forensic Capture mode. Supported AXIS VAPIX API Image Resolutions ========================================== Resolution Exceptions ========== ========== 2560x1920 3) 2560x1440 2) 1920x1080 2) 1600x1200 3) 1280x960 3) 1280x720 2) 1024x768 3) 800x600 3) 800x450 2) 640x480 3) 640x360 2) 480x360 3) 480x270 2) 320x240 3) 768x576 1) 3) 704x576 1) 704x480 1) 384x288 1) 3) 352x240 1) 176x144 1) 176x120 1) 80x60 1) 1) Not visible in web user interface 2) QHD 2560x1440 (16:9) 3) 5MP 2560x1920 (4:3)