FIRMWARE RELEASE NOTE ====================== Products affected: Q1775/-E Release date: 2019-12-12 Release type: Production Firmware version: 8.40.3.1 Preceding release: 8.40.3 -------------------------------------------------------------------------------- Upgrade instructions ==================== Upgrade the firmware according to the instructions given at https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade or howtoupgrade.txt, which is included in the firmware folder. NOTE ==================== For latest information about Axis Cybersecurity, see https://www.axis.com/se/sv/support/product-security. Corrections in 8.40.3.1 since 8.40.3 ===================================== 8.40.3.1:C01 General improvements to the 2018 LTS platform. 8.40.3.1:C02 Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG. 8.40.3.1:C03 Corrected an issue that caused playback from a SD card of recorded MKV files with audio to fail on rare occasions. 8.40.3.1:C04 Corrected an issue with the resolution on the ONVIF command getstatus (PTZ). 8.40.3.1:C05 Corrected an issue that caused a reboot of the camera to start an ACAP even though STARTMODE=never was set in its configuration. 8.40.3.1:C06 Corrected an issue that caused audio not to be included in video clips when audio encoding G711 Mulaw was enabled. 8.40.3.1:C07 Corrected an issue that made it possible to add an action rule recipient without nice-name via API. 8.40.3.1:C08 Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level. 8.40.3.1:C09 Corrected an issue that caused param.cgi to show password in plain text when listing a specified ACAP parameter. 8.40.3.1:C10 Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on rare occasions. 8.40.3.1:C11 Corrected an issue that caused time in recording list to be incorrect for America/Caracas, Africa/Cairo and Asia/Baku. 8.40.3.1:C12 Updated Apache to version 2.4.41 to increase overall minimum cyber security level. 8.40.3.1:C13 Corrected an issue that caused fan status not to be reported correctly via SNMP. 8.40.3.1:C14 Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work properly. 8.40.3.1:C15 Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory default even though no users had been configured yet. 8.40.3.1:C16 Added support for health status from Western Digital SD-cards. 8.40.3.1:C17 Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not work properly. Corrections in 8.40.3 since 8.40.2.2 ===================================== 8.40.3:C01 General minor improvements to the 8.40 LTS platform. 8.40.3:C02 Removed the root users default password in factory defaulted firmware. The password of the root user must be set first in order to initialize VAPIX and ONVIF interfaces to allow further configuration. This change only affects products in its factory defaulted state, products that are already deployed in production systems are not affected by this update until factory defaulted. 8.40.3:C03 Update libssh2 to version 1.9.0 to increase overall minimum cyber security level. This update includes correction for CVE-2019-13115. Corrections in 8.40.2.2 since 8.40.2.1 ======================================= 8.40.2.2:C01 General minor improvements to the 8.40 LTS platform. 8.40.2.2:C02 Corrected the following kernel vulnerabilities to increase overall minimum cyber security level (collectively known as "TCP SACK PANIC"): CVE-2019-11477, CVE-2019-11478, CVE-2019-11479. 8.40.2.2:C03 Corrected an issue that caused problems accessing devices via O3C/Axis Guardian using Microsoft Edge browser. 8.40.2.2:C04 Improved the certificate management system: It is now possible to upload PKCS#12 certificates with a total size of 102400 bytes. The previous limit was 1/10 of it. 8.40.2.2:C05 Corrected an issue that caused some users not to be displayed in the webGUI's user list on rare occasions. 8.40.2.2:C06 Improved the certificate management system: added support for certificate IDs with long names. 8.40.2.2:C07 Updated openSSL to version 1.1.1c to increase overall minimum cyber security level. 8.40.2.2:C08 Added support for TLSv1.3. 8.40.2.2:C09 Corrected security vulnerability in Systemd CVE-2019-6454 to increase overall minimum cyber security level. 8.40.2.2:C10 Improved the certificate management system: added system log information for failing certificate upload. 8.40.2.2:C11 Corrected an issue that caused SMB connection problems to NetApp NAS configured for SMBv2. 8.40.2.2:C12 Updated libssh2 to version 1.8.2 due to that version 1.8.1 broke publickey-userauth requests. 8.40.2.2:C13 Corrected an issue that caused images to be unusually dark in WDR mode on rare occasions. Corrections in 8.40.2.1 since 8.40.2 ===================================== 8.40.2.1:C01 General minor improvements to the 8.40 LTS platform. 8.40.2.1:C02 Updated Apache to version 2.4.39 to increase overall minimum cyber security level. 8.40.2.1:C03 Improved robustness of the O3C client. 8.40.2.1:C04 Updated OpenSSL to version 1.1.1b to increase overall minimum cyber security level. 8.40.2.1:C05 Updated OpenSSH to version 7.9p to increase overall minimum cyber security level. 8.40.2.1:C06 Added information about Certificate ID to the Installed Certificates section in the server report. Corrections in 8.40.2 since 8.40.1.2 ===================================== 8.40.2:C01 General minor improvements to the 8.40 LTS platform. 8.40.2:C02 Corrected the following security vulnerabilities to increase overall minimum cyber security level: CVE-2019-3855, CVE-2019-3856, CVE-2019-3857, CVE-2019-3858, CVE-2019-3859, CVE-2019-3860, CVE-2019-3861, CVE-2019-3862, CVE-2019-3863. 8.40.2:C03 Corrected security vulnerability CVE-2019-0217 in Apache to increase overall minimum cyber security level. 8.40.2:C04 Corrected security vulnerability CVE-2017-16544 in BusyBox to increase overall minimum cyber security level. 8.40.2:C05 Corrected an issue that caused a viewer user to not be able to obtain the list of image resolution properties via param.cgi. 8.40.2:C06 Corrected an issue in the Web-GUI that prevented to upload a Client Certificate or CA certificate using the Edge browser. 8.40.2:C07 Updated pre-installed Mozilla CA-certificates to versions available at 20190122. 8.40.2:C08 Added GOP Length option to the Stream Profile Settings. 8.40.2:C09 Corrected the following vulnerabilities in order to increase overall minimum cybersecurity level: CVE-2018-16864, CVE-2018-16865, CVE-2018-16866. 8.40.2:C10 Updated OpenSSL to version 1.0.2r to increase overall minimum cyber security level. 8.40.2:C11 Corrected an issue with timestamps in the RTCP Sender Report that could cause RTSP recordings/playbacks not to work correctly in some video players using the Live555 library such as VLC and ffmpeg. Corrections in 8.40.1.2 since 8.40.1.1 ======================================= 8.40.1.2:C01 General minor improvements to the 8.40 LTS platform. 8.40.1.2:C02 Corrected an issue in the web GUI when creating a preset position and the language was set to German. 8.40.1.2:C03 Corrected an issue that could cause the camera to get unresponsive when two clients are streaming over multicast using the same streaming parameters. 8.40.1.2:C04 Upgraded Apache to version 2.4.38 to increase overall minimum cyber security level. 8.40.1.2:C05 Corrected an issue with Always Multicast over IPv6. 8.40.1.2:C06 Corrected an issue that caused factory default settings to not be applied correctly when upgrading from a firmware version prior to 6.20. 8.40.1.2:C07 Corrected an issue in the web GUI that caused IO Port values to be displayed incorrectly. 8.40.1.2:C08 Corrected an issue that caused Recorded Guard Tour not to work properly on rare occasions. 8.40.1.2:C09 Improved re-connection behavior to AVHS server. The time between failed connection attempts will now gradually increase until a hard limit is reached. 8.40.1.2:C10 Corrected an issue that prevented usage of the same port for two different multicast streams. 8.40.1.2:C11 Improved list.cgi to display all installed applications (no longer limited to 8). 8.40.1.2:C12 Corrected an issue with pre-installed applications using startmode set to "never". 8.40.1.2:C13 Corrected an issue that could cause an incorrect error message when testing HTTP recipient. 8.40.1.2:C14 Corrected an issue that could cause corrupted video recordings when UserData or TriggerData are enabled. 8.40.1.2:C15 Improved stability in the httptest.cgi. 8.40.1.2:C16 Corrected an issue that caused an HTTP-recipient based action rule to fail when the response from the server excluded the textual phrase (Example: HTTP 200). This will work now. 8.40.1.2:C17 Added Firmware Recovery (Firmware Rollback) information to the server report. Corrections in 8.40.1.1 since 8.40.1 ===================================== 8.40.1.1:C01 Corrected an issue that produced corrupted JPEG file data while the image itself was good. 8.40.1.1:C02 Corrected an issue that prevented the user from uploading a certificate that contains "Bag Attributes" before and after the actual certificate content. 8.40.1.1:C03 Corrected an issue in the ACAP framework that could cause ACAPs to freeze on rare occasions. 8.40.1.1:C04 Patched the following security vulnerabilities to increase overall minimum cyber security level: CVE-2018-10876, CVE-2018-10877, CVE-2018-10878, CVE-2018-10879, CVE-2018-10880, CVE-2018-10881, CVE-2018-10882, CVE-2018-10883. 8.40.1.1:C05 Updated to OpenSSL version 1.0.2p to increase overall minimum cyber security level. 8.40.1.1:C06 Updated Apache to version 2.4.35 to increase overall minimum cyber security level. 8.40.1.1:C07 Patched security vulernability CVE-2018-17182 to increase overall minimum cyber security level. 8.40.1.1:C08 Corrected an issue that caused upload of Axis People Counter via curl to fail in rare occations. New features in 8.40.1 ================================================================================ 8.40.1:F1 Renamed "Browser Stream Statistics" to "Client Stream Information". The Client Stream Information are available in the web-interface of the camera. 8.40.1:F2 Added support for ONVIF Audio Backchannel. 8.40.1:F3 Updated apache webserver to version 2.4.33 to increase overall minimum cyber security level. 8.40.1:F4 Added support for AES-CBC 256-bit SD card encryption. 8.40.1:F5 AXIS Video Motion Detection 4.2.5 is now pre-installed. 8.40.1:F6 AXIS Motion Guard and Fence Guard 2.1.4 are now pre-installed. 8.40.1:F7 Updated help files with more detailed information about SMB and Certificate support in AXIS products. 8.40.1:F8 Added a new section "Snapshot of current CPU utilization" that prints information about CPU utilization and memory consumption of processes in the server report. 8.40.1:F9 Changed the default timeout of HTTP-Recipient based action rules from 10s to 120s to compensate for unstable networks or slow clients. After the timeout is reached, the action rule will be re-tried. 8.40.1:F10 Modified the access rights for serial-port connected cameras to increase overall minimum cyber security level. Corrections in 8.40.1 ================================================================================ 8.40.1:C1 Corrected an issue with incorrect handling of ACAPs after camera boot. 8.40.1:C2 Corrected an issue that prevented the user from formatting SD cards and the web- interface to show incorrect information about network share status in Settings -> System -> Storage. 8.40.1:C3 Added selection boxes for disabling TLSv1.0 and TLSv1.1 in Settings -> System -> PlainConfig -> HTTPS to enforce the highest possible TLS version for HTTPS-based connections. 8.40.1:C4 Corrected an issue that could cause a network share to become read-only. 8.40.1:C5 Corrected an issue that prevented the overlay to show the correct state of inputs when toggling. 8.40.1:C6 Corrected an issue in the ACAP framework that caused installed ACAPs to become unresponsive and the Apps tab not to be shown correctly. 8.40.1:C7 Corrected an issue that let the network share test under Events -> Recipient fail when a NAS was connected that only supports SMB 1.0 or SMB 2.0. 8.40.1:C8 Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working after a firmware upgrade. 8.40.1:C9 Corrected an issue that caused the certificate signing request not to have an LF (alt. CR-LF) every 64th character causing the certificate considered not being valid e.g. when using symantec certificates. 8.40.1:C10 Corrected an issue that prevented the user from creating a Recipient when a "-" sign was present in the host name. 8.40.1:C11 Corrected an issue that could cause the configuration file upload from ADM to camera to fail. 8.40.1:C12 Corrected an issue that prevented the user to export recordings in the desired time range. 8.40.1:C13 Patched security vulnerability CVE-2018-5390 to increase overall minimum cyber security level. 8.40.1:C14 Patched security vulernability CVE-2018-14526 to increase overall minimum cyber security level. Known Bugs/Limitations ================================================================================ 8.40.3:L1 It is recommend to refresh the browser with F5 after doing a FW upgrade from FW 6.xx to 8.xx or higher in order to show all the new settings in the web- interface. 8.30.1.1:L1 When using the Edge or Firefox web browser automatic license installation doesn't work as expected. 8.30.1.1:L2 Some parts of the web-interface may not be fully translated. 8.30.1.1:L3 It is not possible to update the product using Genetec 5.7 SR2. Genetec will provide a patch in 5.7 SR3. 8.30.1.1:L4 It is not possible to change the brightness setting when WDR is enabled. 8.30.1.1:L5 There is only one available pre-installed audio clip (Camera clicks). 8.20.1:L1 When downgrading a firmware the static IP configuration is lost. Axis recommends to perform a factory reset after downgrading. 8.20.1:L2 When performing a firmware rollback to a version older than 5.90 the database on an SD-card or the network share will be incompatible and it needs to be reformatted. 8.20.1:L3 When using an iOS device and Chrome or Safari web browser it is not possible to switch from viewer to administrator or operator. 8.20.1:L4 Zooming via mouse scroll does not work in 8.20.1 release. Factory default or update to higher firmware, when available, is recommended. 8.10.1:L1 It is not possible to receive audio encoding details in the browser stream information. 8.10.1:L2 A user might experience frame drops in rare conditions when video streaming in Firefox 57 due to specific computer hardware. It is recommended to use Google Chrome instead. 8.10.1:L3 It is not possible to to rotate high resolution video streams when using Firefox browser in Windows when playing H.264. 8.10.1:L4 When the camera is restored, the time zone is not saved meaning that it will be set to GMT 0. Supported AXIS VAPIX API Image Resolutions for Q1775/-E ================================================================================ Resolution Exceptions ========== ========== 1920x1200 4) 1920x1080 2) 3) 1600x1200 4) 1400x1050 1280x960 1280x800 1280x720 1024x768 1024x640 800x600 854x480 800x500 800x450 640x480 640x400 640x360 480x360 480x300 480x270 320x240 320x200 320x180 240x180 160x120 160x100 160x90 768x576 1) 720x576 1) 704x576 1) 704x480 1) 704x288 1) 704x240 1) 384x288 1) 352x288 1) 352x240 1) 240x135 1) 192x144 1) 176x144 1) 176x120 1) 80x50 1) 1) Not visible in web user interface 2) 1080p 1920x1080 (16:9) @ 25/30 fps (WDR) 3) 1080p 1920x1080 (16:9) @ 50/60 fps (no WDR) 4) WUXGA 1920x1200 (16:10) @ 25/30 fps (no WDR)