FIRMWARE RELEASE NOTES
======================

Products affected: AXIS P5512-E PTZ Dome Network Camera

Release date:      2011-05-17

Release type:      Production

Firmware version:  5.25

File name:         P5512-E_5_25.bin

Preceding release: n/a

AMC version:       5.9.9.0-1


------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management 3.0, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named
howtoupgrade.txt.


RELEASE 5.25
============

5.25 is the first official release for the AXIS P5512-E.

Known limitations
=================
5.25:L01 Motion detection reacts to IR cut filter switching.

5.25:L02 Uploading an expired or not yet valid encrypted client certificate in PKCS#12 format for 802.1x will succeed instead of being rejected as it should be.

5.25:L03 RTSP clients timeout when syncing unit to computer time due to the keepalive messages being regarded as too old/new depending on the time set.

5.25:L04 Errors in log when removing micro SD card without unmounting it first.

5.25:L05 Focus can sometimes be somewhat poor on the ELMO 401C block.

5.25:L06 Criticals found in system log at restart when Guard tour is running.

5.25:L07 Control panel hidden behind video sometimes. The AMC component is uncontrollable by the web viewer.

5.25:L08 After a factory the default PTZ home position not defined when the PTZ framework is told to go to the home position; the the camera will remain at the calibration point.

5.25:L09 Onvif failing test case 6.2.24. This is due to a bug in the test tool and test specification, i.e. the Axis interpretation is correct.

5.25:L10 No warning message in log when pre-trigger buffer is too large.

5.25:L11 ONVIF speed param is ignored by the camera.

5.25:L12 MJPG recordings to SD card with too high bitrate may cause oom kill of monolith. Lower the bitrate to a rate the SD card/controller can handle. Cant give specifics since it differs between SD cards.

5.25:L13 From time and duration not respected in continuous recording <5 min; Cue points not available and seeking isnt possible until a MKV-file is finalized (stopped or full 5 minutes).



APPLICATION DEVELOPER Information
=================================

The AXIS VAPIX Application Programming Interface is supported by the AXIS
P5512-E.

The following groups are supported by the AXIS P5512-E.
For more information, please refer to the AXIS VAPIX HTTP API specification
version 3, part of the AXIS VAPIX API, available at www.axis.com.

Group             Exceptions
=====             ==========
General
Image and Video
PTZ               PTZ driver update (ptzupdate.cgi), PTZ administration
                  (ptzadmin.cgi), set PTZ parameters (ptzparam.cgi)
Motion Detection
IP filter

Built in templates for dynamic parameters are:

Template              Group
========              =====
'event'               Event
'ftpaction'           Event.E#.Actions
'guardtouraction'     Event.E#.Actions
'httpaction'          Event.E#.Actions
'hwaction'            Event.E#.Actions
'ptzaction'           Event.E#.Actions
'ptzsensoraction'     Event.E#.Actions
'recordaction'        Event.E#.Actions
'smtpaction'          Event.E#.Actions
'tcpaction'           Event.E#.Actions
'ftp_config'          EventServers.FTP
'http_config'         EventServers.HTTP
'tcp_config'          Eventservers.TCP
'guardtour'           GuardTour
'tour'                GuardTour.G#.Tour
'motion'	      Motion
'button'              PTZ.Auxiliary.A1.Button
'ptzlocator'          PTZ.Locator.L#.Zone
'position'            PTZ.Preset.P0.Position
'user_ctlqueue'       PTZ.UserCtlQueue
'streamprofile'       StreamProfile
'streamcache'         StreamCache

Supported AXIS VAPIX API Image Resolutions for AXIS P5512-E


Resolution  Exceptions
==========  ==========
4CIF
704x576     1)
704x480        2)
2CIF
704x288     1)
704x240        2)
CIF
352x288     1)
352x240        2)
QCIF
176x144     1)
176x120        2)

1) Only available for 50Hz cameras
2) Only available for 60Hz cameras

90/270 degress rotation is not supported.